lkml.org 
[lkml]   [2022]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/3] remoteproc: qcom_q6v5_mss: Add support for interconnect bandwidth voting
On Sun 13 Feb 20:34 PST 2022, Sibi Sankar wrote:

> Add support for proxy interconnect bandwidth votes during modem bootup on
> SC7280 SoCs.
>
> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
> ---
> drivers/remoteproc/qcom_q6v5_mss.c | 95 +++++++++++++++++++++++++++++++++++++-
> 1 file changed, 94 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
> index a2c231a17b2b..5a37628311c6 100644
> --- a/drivers/remoteproc/qcom_q6v5_mss.c
> +++ b/drivers/remoteproc/qcom_q6v5_mss.c
> @@ -12,6 +12,7 @@
> #include <linux/devcoredump.h>
> #include <linux/dma-mapping.h>
> #include <linux/interrupt.h>
> +#include <linux/interconnect.h>
> #include <linux/kernel.h>
> #include <linux/mfd/syscon.h>
> #include <linux/module.h>
> @@ -125,6 +126,18 @@
> #define QDSP6SS_BOOT_CMD 0x404
> #define BOOT_FSM_TIMEOUT 10000
>
> +struct interconnect_info {

This is a rather generic name.

> + struct icc_path *path;
> + u32 average_bandwidth;
> + u32 peak_bandwidth;
> +};
> +
> +struct qcom_mss_icc_res {
> + const char *name;
> + u32 average_bandwidth;
> + u32 peak_bandwidth;
> +};
> +
> struct reg_info {
> struct regulator *reg;
> int uV;
> @@ -142,6 +155,7 @@ struct rproc_hexagon_res {
> struct qcom_mss_reg_res *proxy_supply;
> struct qcom_mss_reg_res *fallback_proxy_supply;
> struct qcom_mss_reg_res *active_supply;
> + struct qcom_mss_icc_res *proxy_path;
> char **proxy_clk_names;
> char **reset_clk_names;
> char **active_clk_names;
> @@ -202,6 +216,9 @@ struct q6v5 {
> int proxy_reg_count;
> int fallback_proxy_reg_count;
>
> + struct interconnect_info interconnect[1];

If there is only one, then I think it's perfectly fine that we postpone
the introduction of an array and the loops etc.

But if you see a reason to support multiple paths, I think we should
utilize the icc bulk API.

> + int proxy_path_count;
> +
> bool dump_mba_loaded;
> size_t current_dump_size;
> size_t total_dump_size;
> @@ -267,6 +284,29 @@ static int q6v5_regulator_init(struct device *dev, struct reg_info *regs,
> return i;
> }
>
> +static int q6v5_interconnect_init(struct device *dev, struct interconnect_info *interconnect,
> + const struct qcom_mss_icc_res *icc_res)
> +{
> + struct icc_path *path;
> + int i;
> +
> + for (i = 0; icc_res[i].name; i++) {
> + path = devm_of_icc_get(dev, icc_res[i].name);
> + if (IS_ERR(path)) {
> + int ret = PTR_ERR(path);
> +
> + dev_err_probe(dev, ret, "Failed to get %s interconnect\n", icc_res[i].name);
> + return ret;
> + }
> +
> + interconnect[i].path = path;
> + interconnect[i].average_bandwidth = icc_res[i].average_bandwidth;
> + interconnect[i].peak_bandwidth = icc_res[i].peak_bandwidth;
> + }
> +
> + return i;
> +}
> +
> static int q6v5_regulator_enable(struct q6v5 *qproc,
> struct reg_info *regs, int count)
> {
> @@ -364,6 +404,36 @@ static void q6v5_clk_disable(struct device *dev,
> clk_disable_unprepare(clks[i]);
> }
>
> +static int q6v5_icc_enable(struct device *dev, struct interconnect_info *interconnect, int count)
> +{
> + int ret;
> + int i;
> +
> + for (i = 0; i < count; i++) {
> + ret = icc_set_bw(interconnect[i].path, interconnect[i].average_bandwidth,
> + interconnect[i].peak_bandwidth);
> + if (ret)
> + dev_err(dev, "Failed enabling %s interconnect\n",
> + icc_get_name(interconnect[i].path));
> + goto err;
> + }
> +
> + return 0;
> +err:
> + for (i--; i >= 0; i--)
> + icc_set_bw(interconnect[i].path, 0, 0);

devm_of_icc_get() will return an "enabled" path, but from that point we
can use icc_enable() and icc_disable() to toggle if our vote should be
taking part in the aggregation.

By using that we should be able to just icc_set_bw() in
q6v5_interconnect_init(), call icc_disable() and from there on we can
wrap our proxy vote in icc_enable() and icc_disable(). That way you
don't need to copy average_bandwidth and peak_bandwidth into the
interconnect_info.

Regards,
Bjorn

> +
> + return ret;
> +}
> +
> +static void q6v5_icc_disable(struct device *dev, struct interconnect_info *interconnect, int count)
> +{
> + int i;
> +
> + for (i = 0; i < count; i++)
> + icc_set_bw(interconnect[i].path, 0, 0);
> +}
> +
> static int q6v5_pds_enable(struct q6v5 *qproc, struct device **pds,
> size_t pd_count)
> {
> @@ -1011,10 +1081,14 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> if (ret)
> return ret;
>
> + ret = q6v5_icc_enable(qproc->dev, qproc->interconnect, qproc->proxy_path_count);
> + if (ret)
> + goto disable_irqs;
> +
> ret = q6v5_pds_enable(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
> if (ret < 0) {
> dev_err(qproc->dev, "failed to enable proxy power domains\n");
> - goto disable_irqs;
> + goto disable_path;
> }
>
> ret = q6v5_regulator_enable(qproc, qproc->fallback_proxy_regs,
> @@ -1158,6 +1232,8 @@ static int q6v5_mba_load(struct q6v5 *qproc)
> qproc->fallback_proxy_reg_count);
> disable_proxy_pds:
> q6v5_pds_disable(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
> +disable_path:
> + q6v5_icc_disable(qproc->dev, qproc->interconnect, qproc->proxy_path_count);
> disable_irqs:
> qcom_q6v5_unprepare(&qproc->q6v5);
>
> @@ -1232,6 +1308,7 @@ static void q6v5_mba_reclaim(struct q6v5 *qproc)
> qproc->fallback_proxy_reg_count);
> q6v5_regulator_disable(qproc, qproc->proxy_regs,
> qproc->proxy_reg_count);
> + q6v5_icc_disable(qproc->dev, qproc->interconnect, qproc->proxy_path_count);
> }
> }
>
> @@ -1611,6 +1688,7 @@ static void qcom_msa_handover(struct qcom_q6v5 *q6v5)
> q6v5_regulator_disable(qproc, qproc->fallback_proxy_regs,
> qproc->fallback_proxy_reg_count);
> q6v5_pds_disable(qproc, qproc->proxy_pds, qproc->proxy_pd_count);
> + q6v5_icc_disable(qproc->dev, qproc->interconnect, qproc->proxy_path_count);
> }
>
> static int q6v5_init_mem(struct q6v5 *qproc, struct platform_device *pdev)
> @@ -1942,6 +2020,13 @@ static int q6v5_probe(struct platform_device *pdev)
> }
> qproc->active_reg_count = ret;
>
> + ret = q6v5_interconnect_init(&pdev->dev, qproc->interconnect, desc->proxy_path);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Failed to get proxy interconnects.\n");
> + goto free_rproc;
> + }
> + qproc->proxy_path_count = ret;
> +
> ret = q6v5_pds_attach(&pdev->dev, qproc->proxy_pds,
> desc->proxy_pd_names);
> /* Fallback to regulators for old device trees */
> @@ -2077,6 +2162,14 @@ static const struct rproc_hexagon_res sc7280_mss = {
> "mss",
> NULL
> },
> + .proxy_path = (struct qcom_mss_icc_res[]) {
> + {
> + .name = "imem",
> + .average_bandwidth = 0,
> + .peak_bandwidth = 8532000,
> + },
> + {}
> + },
> .need_mem_protection = true,
> .has_alt_reset = false,
> .has_mba_logs = true,
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2022-02-22 19:32    [W:0.088 / U:0.720 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site