lkml.org 
[lkml]   [2022]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC PATCH 8/8] arm64: dts: ti: use 'freq-table' in UFS node
From
On 22/02/2022 15:07, Nishanth Menon wrote:
> On 14:20-20220221, Krzysztof Kozlowski wrote:
>> On 21/02/2022 14:13, Nishanth Menon wrote:
>>> On 19:45-20220219, Krzysztof Kozlowski wrote:
>>>> The 'freq-table-hz' property is deprecated by UFS bindings.
>>>> The uint32-array requires also element to be passed within one <> block.
>>>>
>>>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
>>>> ---
>>>> arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 4 +++-
>>>> 1 file changed, 3 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
>>>> index 599861259a30..c3afef0321ae 100644
>>>> --- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
>>>> +++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
>>>> @@ -1257,7 +1257,9 @@ ufs@4e84000 {
>>>> compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
>>>> reg = <0x0 0x4e84000 0x0 0x10000>;
>>>> interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
>>>> - freq-table-hz = <250000000 250000000>, <19200000 19200000>, <19200000 19200000>;
>>>> + freq-table = <250000000 250000000
>>>
>>> <min max> is much more readable and less error prone in case of a large
>>> set.
>>
>> Pairs are easily visible if split per line, so readability is similar.
>> Not much is lost.
>>
>>>
>>>> + 19200000 19200000
>>>> + 19200000 19200000>;
>>>
>>> are you sure the removal of the tuple adds value?
>>
>> DT schema requires it, or rather: I do not know how to express uint32
>> tuples in DT schema. All my tries failed.
>
> https://www.kernel.org/doc/Documentation/devicetree/bindings/opp/opp-v1.yaml
> comes to mind..

This works nice, thanks!


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-02-22 15:26    [W:0.040 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site