lkml.org 
[lkml]   [2022]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC][PATCH 1/2] dt-bindings: power: add Energy Model bindings
From


On 2/22/22 11:15, Viresh Kumar wrote:
> On 22-02-22, 11:03, Lukasz Luba wrote:
>> OK, I misunderstood that. If that is possible than it would
>> be great. I'm assuming you are taking about OPP v2.
>
> Yes.
>
>> I can relax the
>> requirement that I need to provide this DT-EM for arm32, since they
>> have a legacy OPP v1.
>
> OPP V2 or V1 doesn't have anything to do with arm32/64. Anyone can implement the
> newer V2 version (basically whoever wants something more than a simple freq/volt
> pair). So arm32 SoC's that want to use the DT-EM thing, should migrate to
> opp-v2, we can't support that with opp-v1.
>
>> So we might have an entry similar that interconnect for the
>> bandwidth, but for us it would be 'opp-power-uw'?
>
> I will rather say similar to opp-microvolt or opp-microamp, so it better be
> opp-microwatt.
>
>> Let me have a look about some examples how that could be just
>> added/extended in the opp table but from board file.
>> If you have some handy link, I would be grateful.
>
> The file I provided earlier:
>
> arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dts
>
> This is updating opp-microvolt property of a single OPP node in the whole table.
> Pretty much like this only.
>

Thanks, I'll use that example for the v2

\
 
 \ /
  Last update: 2022-02-22 12:24    [W:2.450 / U:0.324 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site