lkml.org 
[lkml]   [2022]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2] usb: dwc3: Don't switch OTG -> peripheral if extcon is present
Date
Hi,

Andrey Smirnov wrote:
> If the extcon device exists, get the mode from the extcon device. If
> the controller is DRD and the driver is unable to determine the mode,
> only then default the dr_mode to USB_DR_MODE_PERIPHERAL.
>
> Cc: Felipe Balbi <balbi@kernel.org>
> Cc: Thinh Nguyen <thinhn@synopsys.com>
> Cc: linux-usb@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
>
> v1 of the patch:
>
> https://urldefense.com/v3/__https://lore.kernel.org/linux-usb/20220206014532.372109-1-andrew.smirnov@gmail.com/T/*u__;Iw!!A4F2R9G_pg!MkC0ZJrDw6TYoTkd6CcnR0EBo8D-uvDlqJDRFdaR82BX-16j0ydzGz0FJR4z4VQtdKhZ$
>
> previons discussion:
>
> https://urldefense.com/v3/__https://lore.kernel.org/linux-usb/20220131192102.4115473-1-andrew.smirnov@gmail.com/__;!!A4F2R9G_pg!MkC0ZJrDw6TYoTkd6CcnR0EBo8D-uvDlqJDRFdaR82BX-16j0ydzGz0FJR4z4Syxv17D$
>
>
> drivers/usb/dwc3/core.c | 56 ++++++++++++++++++++++++++++++++++++++++-
> drivers/usb/dwc3/drd.c | 50 ------------------------------------
> 2 files changed, 55 insertions(+), 51 deletions(-)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index f2448d0a9d39..09f283288ce7 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -23,6 +23,7 @@
> #include <linux/delay.h>
> #include <linux/dma-mapping.h>
> #include <linux/of.h>
> +#include <linux/of_graph.h>
> #include <linux/acpi.h>
> #include <linux/pinctrl/consumer.h>
> #include <linux/reset.h>
> @@ -84,7 +85,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc)
> * mode. If the controller supports DRD but the dr_mode is not
> * specified or set to OTG, then set the mode to peripheral.
> */
> - if (mode == USB_DR_MODE_OTG &&
> + if (mode == USB_DR_MODE_OTG && !dwc->edev &&
> (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) ||
> !device_property_read_bool(dwc->dev, "usb-role-switch")) &&
> !DWC3_VER_IS_PRIOR(DWC3, 330A))
> @@ -1462,6 +1463,51 @@ static void dwc3_check_params(struct dwc3 *dwc)
> }
> }
>
> +static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
> +{
> + struct device *dev = dwc->dev;
> + struct device_node *np_phy;
> + struct extcon_dev *edev = NULL;
> + const char *name;
> +
> + if (device_property_read_bool(dev, "extcon"))
> + return extcon_get_edev_by_phandle(dev, 0);
> +
> + /*
> + * Device tree platforms should get extcon via phandle.
> + * On ACPI platforms, we get the name from a device property.
> + * This device property is for kernel internal use only and
> + * is expected to be set by the glue code.
> + */
> + if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
> + edev = extcon_get_extcon_dev(name);
> + if (!edev)
> + return ERR_PTR(-EPROBE_DEFER);
> +
> + return edev;
> + }
> +
> + /*
> + * Try to get an extcon device from the USB PHY controller's "port"
> + * node. Check if it has the "port" node first, to avoid printing the
> + * error message from underlying code, as it's a valid case: extcon
> + * device (and "port" node) may be missing in case of "usb-role-switch"
> + * or OTG mode.
> + */
> + np_phy = of_parse_phandle(dev->of_node, "phys", 0);
> + if (of_graph_is_present(np_phy)) {
> + struct device_node *np_conn;
> +
> + np_conn = of_graph_get_remote_node(np_phy, -1, -1);
> + if (np_conn)
> + edev = extcon_find_edev_by_node(np_conn);
> + of_node_put(np_conn);
> + }
> + of_node_put(np_phy);
> +
> + return edev;
> +}
> +
> static int dwc3_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -1561,6 +1607,14 @@ static int dwc3_probe(struct platform_device *pdev)
> goto err2;
> }
>
> + dwc->edev = dwc3_get_extcon(dwc);
> + if (IS_ERR(dwc->edev)) {
> + ret = PTR_ERR(dwc->edev);
> + dev_err_probe(dwc->dev, ret, "failed to get extcon");

My comment earlier was meant to add "\n" to the error message above, not
adding a new line to the code.

Thanks,
Thinh

> +
> + goto err3;
> + }
> +
> ret = dwc3_get_dr_mode(dwc);
> if (ret)
> goto err3;
\
 
 \ /
  Last update: 2022-02-23 02:00    [W:0.063 / U:0.996 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site