lkml.org 
[lkml]   [2022]   [Feb]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 3/3] soundwire: qcom: add wake up interrupt support
From


On 2/22/22 16:52, Srinivas Kandagatla wrote:
>
>
> On 22/02/2022 19:26, Pierre-Louis Bossart wrote:
>>
>>
>>
>>> +static irqreturn_t qcom_swrm_wake_irq_handler(int irq, void *dev_id)
>>> +{
>>> +    struct qcom_swrm_ctrl *swrm = dev_id;
>>> +    int ret = IRQ_HANDLED;
>>> +    struct sdw_slave *slave;
>>> +
>>> +    clk_prepare_enable(swrm->hclk);
>>> +
>>> +    if (swrm->wake_irq > 0) {
>>> +        if (!irqd_irq_disabled(irq_get_irq_data(swrm->wake_irq)))
>>> +            disable_irq_nosync(swrm->wake_irq);
>>> +    }
>>> +
>>> +    /*
>>> +     * resume all the slaves which must have potentially generated this
>>> +     * interrupt, this should also wake the controller at the same
>>> time.
>>> +     * this is much safer than waking controller directly that will
>>> deadlock!
>>> +     */
>> There should be no difference if you first resume the controller and
>> then attached peripherals, or do a loop where you rely on the pm_runtime
>> framework.
>>
>> The notion that there might be a dead-lock is surprising, you would need
>> to elaborate here.Issue is, if wakeup interrupt resumes the controller
>> first which can
> trigger an slave pending interrupt (ex: Button press event) in the
> middle of resume that will try to wake the slave device which in turn
> will try to wake parent in the middle of resume resulting in a dead lock.
>
> This was the best way to avoid dead lock.

Not following, sorry. if you use pm_runtime functions and it so happens
that the resume already started, then those routines would wait for the
resume to complete.

In other words, there can be multiple requests to resume, but only the
*first* request will trigger a transition and others will just increase
a refcount.

In addition, the pm_runtime framework guarantees that the peripheral
device can only start resuming when the parent controller device is
fully resumed.

While I am at it, one thing that kept us busy as well is the
relationship between system suspend and pm_runtime suspend. In the
generic case a system suspend will cause a pm_runtime resume before you
can actually start the system suspend, but you might be able to skip
this step. In the Intel case when the controller and its parent device
were suspended we had to pm_runtime resume everything because some
registers were no longer accessible.


\
 
 \ /
  Last update: 2022-02-23 01:32    [W:0.054 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site