lkml.org 
[lkml]   [2022]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v10 2/4] Documentation/dt: Add descriptions for loongson display controller
From
On 20/02/2022 19:22, Jiaxun Yang wrote:
>
>
> 在 2022/2/20 14:55, Sui Jingfeng 写道:
>> From: suijingfeng <suijingfeng@loongson.cn>
>>
>> Add DT documentation for loongson display controller found in LS2K1000,
>> LS2K0500 and LS7A1000.
>>
>> v2: DT binding docs and includes should be a separate patch,
>> fix a warnning because of that.
>>
>> v3: split dt-bindings from other changes into a separate patch.
>>
>> v4: fix warnings and errors when running make dt_binding_check
>>
>> Reported-by: Rob Herring <robh@kernel.org>
>> Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
>> Signed-off-by: suijingfeng <suijingfeng@loongson.cn>
>> Signed-off-by: Sui Jingfeng <15330273260@189.cn>
>> ---
>> .../loongson/loongson,display-controller.yaml | 122 ++++++++++++++++++
>> 1 file changed, 122 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml
>> new file mode 100644
>> index 000000000000..ee1a59b91943
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml
>> @@ -0,0 +1,122 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/display/loongson/loongson,display-controller.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Loongson LS7A1000/LS2K1000/LS2K0500 Display Controller Device Tree Bindings
>> +
>> +maintainers:
>> + - Sui Jingfeng <suijingfeng@loongson.cn>
>> +
>> +description: |+
>> +
>> + Loongson display controllers are simple which require scanout buffers
>> + to be physically contiguous. LS2K1000/LS2K0500 is a SOC, only system
>> + memory is available. LS7A1000/LS7A2000 is bridge chip which is equipped
>> + with a dedicated video ram which is 64MB or more.
>> +
>> + For LS7A1000, there are 4 dedicated GPIOs whose control register is
>> + located at the DC register space. They are used to emulate two way i2c,
>> + One for DVO0, another for DVO1.
>> +
>> + LS2K1000 and LS2K0500 SoC grab i2c adapter from other module, either
>> + general purpose GPIO emulated i2c or hardware i2c in the SoC.
>> +
>> + LSDC has two display pipes, each way has a DVO interface which provide
>> + RGB888 signals, vertical & horizontal synchronisations, data enable and
>> + the pixel clock. LSDC has two CRTC, each CRTC is able to scanout from
>> + 1920x1080 resolution at 60Hz. Each CRTC has two FB address registers.
>> +
>> + LSDC's display pipeline have several components as below description,
>> +
>> + The display controller in LS7A1000:
>> + ___________________ _________
>> + | -------| | |
>> + | CRTC0 --> | DVO0 ----> Encoder0 ---> Connector0 ---> | Monitor |
>> + | _ _ -------| ^ ^ |_________|
>> + | | | | | -------| | |
>> + | |_| |_| | i2c0 <--------+-------------+
>> + | -------|
>> + | DC IN LS7A1000 |
>> + | _ _ -------|
>> + | | | | | | i2c1 <--------+-------------+
>> + | |_| |_| -------| | | _________
>> + | -------| | | | |
>> + | CRTC1 --> | DVO1 ----> Encoder1 ---> Connector1 ---> | Panel |
>> + | -------| |_________|
>> + |___________________|
>> +
>> + Simple usage of LS7A1000 with LS3A4000 CPU:
>> +
>> + +------+ +-----------------------------------+
>> + | DDR4 | | +-------------------+ |
>> + +------+ | | PCIe Root complex | LS7A1000 |
>> + || MC0 | +--++---------++----+ |
>> + +----------+ HT 3.0 | || || |
>> + | LS3A4000 |<-------->| +---++---+ +--++--+ +---------+ +------+
>> + | CPU |<-------->| | GC1000 | | LSDC |<-->| DDR3 MC |<->| VRAM |
>> + +----------+ | +--------+ +-+--+-+ +---------+ +------+
>> + || MC1 +---------------|--|----------------+
>> + +------+ | |
>> + | DDR4 | +-------+ DVO0 | | DVO1 +------+
>> + +------+ VGA <--|ADV7125|<--------+ +-------->|TFP410|--> DVI/HDMI
>> + +-------+ +------+
>> +
>> + The display controller in LS2K1000/LS2K0500:
>> + ___________________ _________
>> + | -------| | |
>> + | CRTC0 --> | DVO0 ----> Encoder0 ---> Connector0 ---> | Monitor |
>> + | _ _ -------| ^ ^ |_________|
>> + | | | | | | | |
>> + | |_| |_| | +------+ |
>> + | <---->| i2c0 |<---------+
>> + | DC IN LS2K1000 | +------+
>> + | _ _ | +------+
>> + | | | | | <---->| i2c1 |----------+
>> + | |_| |_| | +------+ | _________
>> + | -------| | | | |
>> + | CRTC1 --> | DVO1 ----> Encoder1 ---> Connector1 ---> | Panel |
>> + | -------| |_________|
>> + |___________________|
>> +
>> +properties:
>> + $nodename:
>> + pattern: "^display-controller@[0-9a-f],[0-9a-f]$"
>> +
>> + compatible:
>> + enum:
>> + - loongson,ls7a1000-dc
>> + - loongson,ls2k1000-dc
>> + - loongson,ls2k0500-dc
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - interrupts
>> +
>> +additionalProperties: false
> Given that it is possible to have output subnodes I guess
> additionalProperties
> should be allowed?

subnodes should be instead listed. Either with strict name (if these are
e.g. ports) or with some more or less relaxed pattern.


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-09-17 16:15    [W:0.095 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site