lkml.org 
[lkml]   [2022]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 11/13] KVM: SVM: Add logic to switch between APIC and x2APIC virtualization mode
Date
When an AVIC-enabled guest switch from APIC to x2APIC mode during runtime,
the SVM driver needs to

1. Set the x2APIC mode bit for AVIC in VMCB along with the maximum
APIC ID support for each mode accodingly.

2. Disable x2APIC MSRs interception in order to allow the hardware
to virtualize x2APIC MSRs accesses.

This is currently handled in the svm_refresh_apicv_exec_ctrl().

Note that guest kerenel does not need to disable APIC before swtiching
to x2APIC. Therefore the WARN_ON in vcpu_load() to check if the vCPU is
currently running is no longer appropriate.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
---
arch/x86/kvm/svm/avic.c | 61 +++++++++++++++++++++++++++++++++++++----
1 file changed, 55 insertions(+), 6 deletions(-)

diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index 3543b7a4514a..3306b74f1d8b 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -79,6 +79,50 @@ static inline enum avic_modes avic_get_vcpu_apic_mode(struct vcpu_svm *svm)
return AVIC_MODE_NONE;
}

+static inline void avic_set_x2apic_msr_interception(struct vcpu_svm *svm, bool disable)
+{
+ int i;
+
+ for (i = 0x800; i <= 0x8ff; i++)
+ set_msr_interception(&svm->vcpu, svm->msrpm, i,
+ !disable, !disable);
+}
+
+void avic_activate_vmcb(struct vcpu_svm *svm)
+{
+ struct vmcb *vmcb = svm->vmcb01.ptr;
+
+ vmcb->control.int_ctl |= AVIC_ENABLE_MASK;
+
+ if (svm->x2apic_enabled) {
+ vmcb->control.int_ctl |= X2APIC_MODE_MASK;
+ vmcb->control.avic_physical_id &= ~X2AVIC_MAX_PHYSICAL_ID;
+ vmcb->control.avic_physical_id |= X2AVIC_MAX_PHYSICAL_ID;
+ /* Disabling MSR intercept for x2APIC registers */
+ avic_set_x2apic_msr_interception(svm, false);
+ } else {
+ vmcb->control.avic_physical_id &= ~AVIC_MAX_PHYSICAL_ID;
+ vmcb->control.avic_physical_id |= AVIC_MAX_PHYSICAL_ID;
+ /* Enabling MSR intercept for x2APIC registers */
+ avic_set_x2apic_msr_interception(svm, true);
+ }
+}
+
+void avic_deactivate_vmcb(struct vcpu_svm *svm)
+{
+ struct vmcb *vmcb = svm->vmcb01.ptr;
+
+ vmcb->control.int_ctl &= ~(AVIC_ENABLE_MASK | X2APIC_MODE_MASK);
+
+ if (svm->x2apic_enabled)
+ vmcb->control.avic_physical_id &= ~X2AVIC_MAX_PHYSICAL_ID;
+ else
+ vmcb->control.avic_physical_id &= ~AVIC_MAX_PHYSICAL_ID;
+
+ /* Enabling MSR intercept for x2APIC registers */
+ avic_set_x2apic_msr_interception(svm, true);
+}
+
/* Note:
* This function is called from IOMMU driver to notify
* SVM to schedule in a particular vCPU of a particular VM.
@@ -195,13 +239,12 @@ void avic_init_vmcb(struct vcpu_svm *svm)
vmcb->control.avic_backing_page = bpa & AVIC_HPA_MASK;
vmcb->control.avic_logical_id = lpa & AVIC_HPA_MASK;
vmcb->control.avic_physical_id = ppa & AVIC_HPA_MASK;
- vmcb->control.avic_physical_id |= AVIC_MAX_PHYSICAL_ID;
vmcb->control.avic_vapic_bar = APIC_DEFAULT_PHYS_BASE & VMCB_AVIC_APIC_BAR_MASK;

if (kvm_apicv_activated(svm->vcpu.kvm))
- vmcb->control.int_ctl |= AVIC_ENABLE_MASK;
+ avic_activate_vmcb(svm);
else
- vmcb->control.int_ctl &= ~AVIC_ENABLE_MASK;
+ avic_deactivate_vmcb(svm);
}

static u64 *avic_get_physical_id_entry(struct kvm_vcpu *vcpu,
@@ -657,6 +700,13 @@ void avic_update_vapic_bar(struct vcpu_svm *svm, u64 data)
svm->x2apic_enabled ? "x2APIC" : "xAPIC");
vmcb_mark_dirty(svm->vmcb, VMCB_AVIC);
kvm_vcpu_update_apicv(&svm->vcpu);
+
+ /*
+ * The VM could be running w/ AVIC activated switching from APIC
+ * to x2APIC mode. We need to all refresh to make sure that all
+ * x2AVIC configuration are being done.
+ */
+ svm_refresh_apicv_exec_ctrl(&svm->vcpu);
}

void svm_set_virtual_apic_mode(struct kvm_vcpu *vcpu)
@@ -722,9 +772,9 @@ void svm_refresh_apicv_exec_ctrl(struct kvm_vcpu *vcpu)
* accordingly before re-activating.
*/
avic_post_state_restore(vcpu);
- vmcb->control.int_ctl |= AVIC_ENABLE_MASK;
+ avic_activate_vmcb(svm);
} else {
- vmcb->control.int_ctl &= ~AVIC_ENABLE_MASK;
+ avic_deactivate_vmcb(svm);
}
vmcb_mark_dirty(vmcb, VMCB_AVIC);

@@ -1019,7 +1069,6 @@ void avic_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
return;

entry = READ_ONCE(*(svm->avic_physical_id_cache));
- WARN_ON(entry & AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK);

entry &= ~AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK;
entry |= (h_physical_id & AVIC_PHYSICAL_ID_ENTRY_HOST_PHYSICAL_ID_MASK);
--
2.25.1
\
 
 \ /
  Last update: 2022-02-21 04:21    [W:0.405 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site