Messages in this thread | | | Date | Mon, 21 Feb 2022 09:35:17 +0800 | Subject | Re: [PATCH v8 2/3] MIPS: Loongson64: dts: update the display controller device node | From | Sui Jingfeng <> |
| |
On 2022/2/18 00:39, Rob Herring wrote: > On Thu, 17 Feb 2022 02:17:11 +0800, Sui Jingfeng wrote: >> From: suijingfeng <suijingfeng@loongson.cn> >> >> The display controller is a pci device, its PCI vendor id is 0x0014 >> its PCI device id is 0x7a06. >> >> 1) In order to let the lsdc kms driver to know which chip the DC is >> contained in, we add different compatible for different chip. >> >> 2) Add display controller device node for ls2k1000 SoC >> >> Signed-off-by: suijingfeng <suijingfeng@loongson.cn> >> Signed-off-by: Sui Jingfeng <15330273260@189.cn> >> --- >> .../loongson/loongson,display-controller.yaml | 114 ++++++++++++++++++ >> .../display/loongson/loongson-drm.txt | 16 +++ >> .../boot/dts/loongson/loongson64-2k1000.dtsi | 8 ++ >> arch/mips/boot/dts/loongson/ls7a-pch.dtsi | 7 +- >> 4 files changed, 140 insertions(+), 5 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml >> create mode 100644 Documentation/devicetree/bindings/display/loongson/loongson-drm.txt >> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' > on your patch (DT_CHECKER_FLAGS is new in v5.13): > > yamllint warnings/errors: > > dtschema/dtc warnings/errors: > ./Documentation/devicetree/bindings/display/loongson/loongson,display-controller.yaml: $id: relative path/filename doesn't match actual path or filename > expected: http://devicetree.org/schemas/display/loongson/loongson,display-controller.yaml# > Error: Documentation/devicetree/bindings/display/loongson/loongson,display-controller.example.dts:22.30-31 syntax error > FATAL ERROR: Unable to parse input tree > make[1]: *** [scripts/Makefile.lib:378: Documentation/devicetree/bindings/display/loongson/loongson,display-controller.example.dt.yaml] Error 1 > make[1]: *** Waiting for unfinished jobs.... > make: *** [Makefile:1398: dt_binding_check] Error 2 > > doc reference errors (make refcheckdocs): > > See https://patchwork.ozlabs.org/patch/1593886 > > This check can fail if there are any dependencies. The base for a patch > series is generally the most recent rc1. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit. > Ok, I know that now, thank for you point it to me.
| |