lkml.org 
[lkml]   [2022]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] pata_parport: second preview
From
On 2022/02/21 7:49, Ondrej Zary wrote:
> Hello,
> here's a second version of pata_parport. Now a complete patch with protocol
> drivers (cleaned up coding style).
>
> The device model is complete now (pata_parport bus, protocol drivers and
> manually created devices). Devices can also be deleted:
> # echo pata_parport.0 > /sys/bus/pata_parport/delete_device
>
> Protocol registration could be improved - I don't like protocols[] and
> protocol numbers, devices should probably be created by protocol name.
> Also the LPT port base addresses should probably be replaced by port names
> (like parport0).
>
> The bpck driver seems to need to know if a CD drive is attached (weird) but
> I doubt that I can get such info from libata.
>
> I haven't tested other devices yet, only the Imation SuperDisk drive:
>
> [ 4297.947270] paride: epat registered as protocol 0
> [ 4302.019782] pata_parport pata_parport.0: 0x378 is parport0
> [ 4302.030573] pata_parport pata_parport.0: epat: port 0x378, mode 0, ccr 0, test=(0,256,0)
> [ 4302.030587] pata_parport pata_parport.0: Sharing parport0 at 0x378
> [ 4302.030719] pata_parport pata_parport.0: epat, Shuttle EPAT chip c6 at 0x378, mode 0 (4-bit), delay 0
> [ 4302.062891] scsi host4: pata_parport-epat
> [ 4302.063036] ata6: PATA max PIO0 port parport0 protocol epat
> [ 4302.277720] ata6.00: ATAPI: LS-120 COSM 04 UHD Floppy, 0270M09T, max PIO2
> [ 4302.358986] scsi 4:0:0:0: Direct-Access MATSHITA LS-120 COSM 04 0270 PQ: 0 ANSI: 5
> [ 4302.394406] sd 4:0:0:0: Attached scsi generic sg1 type 0
> [ 4302.429152] sd 4:0:0:0: [sdb] Media removed, stopped polling
> [ 4302.461007] sd 4:0:0:0: [sdb] Attached SCSI removable disk
>
>
> ---
> drivers/ata/Kconfig | 25 +
> drivers/ata/Makefile | 2 +
> drivers/ata/pata_parport/Kconfig | 189 ++++++
> drivers/ata/pata_parport/Makefile | 24 +
> drivers/ata/pata_parport/aten.c | 139 +++++
> drivers/ata/pata_parport/bpck.c | 481 +++++++++++++++
> drivers/ata/pata_parport/bpck6.c | 164 +++++
> drivers/ata/pata_parport/comm.c | 198 ++++++
> drivers/ata/pata_parport/dstr.c | 226 +++++++
> drivers/ata/pata_parport/epat.c | 320 ++++++++++
> drivers/ata/pata_parport/epia.c | 308 ++++++++++
> drivers/ata/pata_parport/fit2.c | 135 +++++
> drivers/ata/pata_parport/fit3.c | 195 ++++++
> drivers/ata/pata_parport/friq.c | 263 ++++++++
> drivers/ata/pata_parport/frpw.c | 292 +++++++++
> drivers/ata/pata_parport/kbic.c | 292 +++++++++
> drivers/ata/pata_parport/ktti.c | 112 ++++
> drivers/ata/pata_parport/on20.c | 136 +++++
> drivers/ata/pata_parport/on26.c | 302 +++++++++
> drivers/ata/pata_parport/pata_parport.c | 773 ++++++++++++++++++++++++
> drivers/ata/pata_parport/pata_parport.h | 114 ++++

This is a very large patch... Could you split this into multiple patches ?
1) The first patch adds the generic pata_parport & Kconfig
2) Following patches add pata_parport drivers, one patch per driver.

That will make reviewing easier.



--
Damien Le Moal
Western Digital Research

\
 
 \ /
  Last update: 2022-02-21 01:07    [W:0.056 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site