lkml.org 
[lkml]   [2022]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCHv2 03/29] x86/tdx: Add __tdx_module_call() and __tdx_hypercall() helper functions

    > /*
    > diff --git a/arch/x86/kernel/tdxcall.S b/arch/x86/kernel/tdxcall.S
    > new file mode 100644
    > index 000000000000..ba5e8e35de36
    > --- /dev/null
    > +++ b/arch/x86/kernel/tdxcall.S
    > @@ -0,0 +1,76 @@
    > +#include <asm/asm-offsets.h>
    > +
    > +/*
    > + * TDX guests use the TDCALL instruction to make requests to the
    > + * TDX module and hypercalls to the VMM.
    > + *
    > + * TDX host user SEAMCALL instruction to make requests to TDX module.
    > + *
    > + * They are supported in Binutils >= 2.36.
    > + */
    > +#define tdcall .byte 0x66,0x0f,0x01,0xcc
    > +#define seamcall .byte 0x66,0x0f,0x01,0xcf
    > +
    > +.macro TDX_MODULE_CALL host:req
    > + /*
    > + * R12 will be used as temporary storage for struct tdx_module_output
    > + * pointer. Since R12-R15 registers are not used by TDCALL/SEAMCALL
    > + * services supported by this function, it can be reused.
    > + */
    > +
    > + /* Callee saved, so preserve it */
    > + push %r12
    > +
    > + /*
    > + * Push output pointer to stack.
    > + * After the operation, it will be fetched into R12 register.
    > + */
    > + push %r9
    > +
    > + /* Mangle function call ABI into TDCALL/SEAMCALL ABI: */
    > + /* Move Leaf ID to RAX */
    > + mov %rdi, %rax
    > + /* Move input 4 to R9 */
    > + mov %r8, %r9
    > + /* Move input 3 to R8 */
    > + mov %rcx, %r8
    > + /* Move input 1 to RCX */
    > + mov %rsi, %rcx
    > + /* Leave input param 2 in RDX */

    Currently host seamcall also uses a data structure which has all possible input
    registers as input argument, rather than having one argument for each register:

    struct seamcall_regs_in {
    u64 rcx;
    u64 rdx;
    u64 r8;
    u64 r9;
    };

    Which way is better (above struct name can be changed of course)?

    Or should we rename tdx_module_output to tdx_module_regs, and use it as both
    input and output (similar to __tdx_hypercall())?

    > +
    > + .if \host
    > + seamcall
    > + .else
    > + tdcall
    > + .endif
    > +
    > + /*
    > + * Fetch output pointer from stack to R12 (It is used
    > + * as temporary storage)
    > + */
    > + pop %r12

    For host SEAMCALL, one additional check against VMfailInvalid needs to be
    done after here. This is because at host side, both P-SEAMLDR and TDX module
    are expected to be loaded by UEFI (i.e. UEFI shell tool) before booting to the
    kernel, therefore host kernel needs to detect whether them have been loaded, by
    issuing SEAMCALL.

    When SEAM software (P-SEAMLDR or TDX module) is not loaded, the SEAMCALL fails
    with VMfailInvalid. VMfailInvalid is indicated via a combination of RFLAGS
    rather than using %rax. In practice, RFLAGS.CF=1 can be used to check whether
    VMfailInvalid happened, and we need to have something like below:

    /*
    * SEAMCALL instruction is essentially a VMExit from VMX root
    * mode to SEAM VMX root mode. VMfailInvalid (CF=1) indicates
    * that the targeted SEAM firmware is not loaded or disabled,
    * or P-SEAMLDR is busy with another SEAMCALL. %rax is not
    * changed in this case.
    *
    * Set %rax to VMFAILINVALID for VMfailInvalid. This value
    * will never be used as actual SEAMCALL error code.
    */
    jnb .Lno_vmfailinvalid
    mov $(VMFAILINVALID), %rax
    jmp .Lno_output_struct

    .Lno_vmfailinvalid:

    > +
    > + /* Check for success: 0 - Successful, otherwise failed */
    > + test %rax, %rax
    > + jnz .Lno_output_struct
    > +
    > + /*
    > + * Since this function can be initiated without an output pointer,
    > + * check if caller provided an output struct before storing
    > + * output registers.
    > + */
    > + test %r12, %r12
    > + jz .Lno_output_struct
    > +
    > + /* Copy result registers to output struct: */
    > + movq %rcx, TDX_MODULE_rcx(%r12)
    > + movq %rdx, TDX_MODULE_rdx(%r12)
    > + movq %r8, TDX_MODULE_r8(%r12)
    > + movq %r9, TDX_MODULE_r9(%r12)
    > + movq %r10, TDX_MODULE_r10(%r12)
    > + movq %r11, TDX_MODULE_r11(%r12)
    > +
    > +.Lno_output_struct:
    > + /* Restore the state of R12 register */
    > + pop %r12
    > +.endm
    > --
    > Kirill A. Shutemov

    \
     
     \ /
      Last update: 2022-02-02 12:00    [W:3.885 / U:0.044 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site