Messages in this thread | | | Date | Wed, 02 Feb 2022 10:34:39 +0000 | From | Paul Cercueil <> | Subject | Re: [PATCH v12 8/9] MIPS: DTS: CI20: fix how ddc power is enabled |
| |
Le lun., janv. 31 2022 at 13:26:54 +0100, H. Nikolaus Schaller <hns@goldelico.com> a écrit : > Originally we proposed a new hdmi-5v-supply regulator reference > for CI20 device tree but that was superseded by a better idea to use > the already defined "ddc-en-gpios" property of the "hdmi-connector". > > Since "MIPS: DTS: CI20: Add DT nodes for HDMI setup" has already > been applied to v5.17-rc1, we add this on top. > > Fixes: ae1b8d2c2de9 ("MIPS: DTS: CI20: Add DT nodes for HDMI setup") > Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Cheers, -Paul
> --- > arch/mips/boot/dts/ingenic/ci20.dts | 15 ++------------- > 1 file changed, 2 insertions(+), 13 deletions(-) > > diff --git a/arch/mips/boot/dts/ingenic/ci20.dts > b/arch/mips/boot/dts/ingenic/ci20.dts > index 3e336b3dbb109..ab6e3dc0bc1d0 100644 > --- a/arch/mips/boot/dts/ingenic/ci20.dts > +++ b/arch/mips/boot/dts/ingenic/ci20.dts > @@ -83,6 +83,8 @@ hdmi_out: connector { > label = "HDMI OUT"; > type = "a"; > > + ddc-en-gpios = <&gpa 25 GPIO_ACTIVE_HIGH>; > + > port { > hdmi_con: endpoint { > remote-endpoint = <&dw_hdmi_out>; > @@ -114,17 +116,6 @@ otg_power: fixedregulator@2 { > gpio = <&gpf 14 GPIO_ACTIVE_LOW>; > enable-active-high; > }; > - > - hdmi_power: fixedregulator@3 { > - compatible = "regulator-fixed"; > - > - regulator-name = "hdmi_power"; > - regulator-min-microvolt = <5000000>; > - regulator-max-microvolt = <5000000>; > - > - gpio = <&gpa 25 0>; > - enable-active-high; > - }; > }; > > &ext { > @@ -576,8 +567,6 @@ &hdmi { > pinctrl-names = "default"; > pinctrl-0 = <&pins_hdmi_ddc>; > > - hdmi-5v-supply = <&hdmi_power>; > - > ports { > #address-cells = <1>; > #size-cells = <0>; > -- > 2.33.0 >
| |