lkml.org 
[lkml]   [2022]   [Feb]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v2] x86/PCI: Improve log message when IRQ cannot be identified
On Wed, Feb 02, 2022 at 10:13:31PM +0000, Brent Spillner wrote:
> On Wed, Feb 2, 2022 at 6:13 PM Bjorn Helgaas <helgaas@kernel.org> wrote:
> > IIUC pirq_enable_irq() is only used for non-ACPI, non-DT, non-Xen,
> > non-Intel MID systems, so this is a real legacy path.
> >
> > I don't think it's really worth cluttering an error case in a path
> > that should be rarely used in the first place.
>
> I figured if people are getting this message, then they either have
> broken hardware or are debugging something, and if the message is
> trying to be useful then it can't hurt to mention other things that
> might help. If the pirq path has become buggy or unsupportable in
> modern kernels then it probably ought to be removed altogether; if it
> still works, however rarely it might be needed these days, then it's
> perhaps worth mentioning to those who might occasionally have a use
> for it.
>
> > Are you seeing a problem where you're getting the wrong error message
> > today? Can we just fix that problem instead so no kernel parameter is
> > needed in the first place?
>
> I was trying to isolate intermittent ACPI errors and tried booting
> with acpi=noirq, as seemingly the closest modern equivalent to the
> acpi=ht that had solved, or at least half-split, similar issues for me
> in the past. With noirq, a different PCIe device stopped working (MPT
> Fusion driver not picking up any responses to doorbell interrupts),

If your system has ACPI, I think "pci=biosirq" and "acpi=noirq" are at
best distractions from finding the real problem.

> and while reviewing dmesg I noticed that the PCI error messages were
> suggesting a kernel option that wasn't appropriate for my x86_64
> architecture. In an ideal world with no hardware or driver problems
> these log messages should never even happen, but in the real world of
> troubleshooting and debugging I think they can be useful, and if
> they're going to be reported they might as well be correct.
>
> Obviously, this is a very minor bug, affecting only logs rather than
> behavior, and I'm sure there are more pressing things to worry about.
> On the other hand, it also seems like a very easy and low-risk fix
> that leaves the kernel in a slightly better state for future users and
> developers. At any rate, the current state of the PCI code (a)
> generates a message that recommends specific kernel parameters, (b)
> does so even on builds for which those parameters are inappropriate,
> (c) doesn't say anything to encourage bug reports, and (d) doesn't
> warn about the risks of noirq, which could cause other problems to be
> misattributed. So even though the alternate messages I drafted may not
> be perfect, and might need to be tuned in the future based on patterns
> in whatever bug reports come in, I'm still confident that they're an
> improvement (and I'm open to further suggestions).

This path has to do with ancient x86 and BIOS history, which I know
very little about. If I were going to do something about these
messages, here's what I would do. Maybe it's too aggressive; I dunno.

diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 97b63e35e152..553c9f00c0e0 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -1473,8 +1473,6 @@ static int pirq_enable_irq(struct pci_dev *dev)

pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
if (pin && !pcibios_lookup_irq(dev, 1)) {
- char *msg = "";
-
if (!io_apic_assign_pci_irqs && dev->irq)
return 0;

@@ -1516,13 +1514,9 @@ static int pirq_enable_irq(struct pci_dev *dev)
dev_info(&dev->dev, "PCI->APIC IRQ transform: "
"INT %c -> IRQ %d\n", 'A' + pin - 1, irq);
return 0;
- } else
- msg = "; probably buggy MP table";
+ }
#endif
- } else if (pci_probe & PCI_BIOS_IRQ_SCAN)
- msg = "";
- else
- msg = "; please try using pci=biosirq";
+ }

/*
* With IDE legacy devices the IRQ lookup failure is not
@@ -1532,8 +1526,8 @@ static int pirq_enable_irq(struct pci_dev *dev)
!(dev->class & 0x5))
return 0;

- dev_warn(&dev->dev, "can't find IRQ for PCI INT %c%s\n",
- 'A' + pin - 1, msg);
+ dev_warn(&dev->dev, "can't find IRQ for PCI INT %c\n",
+ 'A' + pin - 1);
}
return 0;
}
\
 
 \ /
  Last update: 2022-02-02 23:43    [W:0.057 / U:0.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site