lkml.org 
[lkml]   [2022]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 8/8] arm64: dts: ti: use 'freq-table' in UFS node
Date
The 'freq-table-hz' property is deprecated by UFS bindings.
The uint32-array requires also element to be passed within one <> block.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
---
arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 599861259a30..c3afef0321ae 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1257,7 +1257,9 @@ ufs@4e84000 {
compatible = "cdns,ufshc-m31-16nm", "jedec,ufs-2.0";
reg = <0x0 0x4e84000 0x0 0x10000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- freq-table-hz = <250000000 250000000>, <19200000 19200000>, <19200000 19200000>;
+ freq-table = <250000000 250000000
+ 19200000 19200000
+ 19200000 19200000>;
clocks = <&k3_clks 277 0>, <&k3_clks 277 1>, <&k3_clks 277 1>;
clock-names = "core_clk", "phy_clk", "ref_clk";
dma-coherent;
--
2.32.0
\
 
 \ /
  Last update: 2022-02-19 19:47    [W:0.085 / U:0.544 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site