lkml.org 
[lkml]   [2022]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V3 0/3] nvmem: allow specifying cells by just names in DT
Date
From: Rafał Miłecki <rafal@milecki.pl>

These changes will allow me to improve BCM5301X support with:

diff --git a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
index 24ae3c8a3..9efcb2424 100644
--- a/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
@@ -25,6 +25,9 @@ memory@0 {
nvram@1eff0000 {
compatible = "brcm,nvram";
reg = <0x1eff0000 0x10000>;
+
+ et0macaddr: et0macaddr {
+ };
};

leds {
@@ -72,6 +75,11 @@ restart {
};
};

+&gmac0 {
+ nvmem-cells = <&et0macaddr>;
+ nvmem-cell-names = "mac-address";
+};
+
&usb3 {
vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
};
Rafał Miłecki (3):
dt-bindings: nvmem: make "reg" property optional
dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells
nvmem: core: add cell name based matching of DT cell nodes

.../devicetree/bindings/nvmem/brcm,nvram.yaml | 25 +++++++++++++++--
.../devicetree/bindings/nvmem/nvmem.yaml | 3 ---
drivers/nvmem/core.c | 27 +++++++++++++++++++
3 files changed, 50 insertions(+), 5 deletions(-)
--
2.34.1

\
 
 \ /
  Last update: 2022-02-18 08:08    [W:1.886 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site