lkml.org 
[lkml]   [2022]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subjectrtl8192e: use BIT macro instead of left shifting
From eaca0dd8fcbe3ff6daf14ea7a532e53acf840790 Mon Sep 17 00:00:00 2001
From: Moses Christopher Bollavarapu <mosescb.dev@gmail.com>
Date: Fri, 18 Feb 2022 16:08:16 +0100
Subject: [PATCH] drivers: staging: rtl8192e: use BIT macro instead of left shifting

There is a BIT(nr) macro available in vdso/bits.h
which is doing the same left shift operation

Example: (1 << 7) == BIT(7)

Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com>
---
drivers/staging/rtl8192e/rtllib_debug.h | 54 +++++++++++++------------
1 file changed, 28 insertions(+), 26 deletions(-)

diff --git a/drivers/staging/rtl8192e/rtllib_debug.h b/drivers/staging/rtl8192e/rtllib_debug.h
index 9065901636f5..e3e8302945eb 100644
--- a/drivers/staging/rtl8192e/rtllib_debug.h
+++ b/drivers/staging/rtl8192e/rtllib_debug.h
@@ -7,6 +7,8 @@
#ifndef _RTL_DEBUG_H
#define _RTL_DEBUG_H

+#include <linux/bits.h>
+
/* Allow files to override DRV_NAME */
#ifndef DRV_NAME
#define DRV_NAME "rtllib_92e"
@@ -16,32 +18,32 @@ extern u32 rt_global_debug_component;

/* These are the defines for rt_global_debug_component */
enum RTL_DEBUG {
- COMP_TRACE = (1 << 0),
- COMP_DBG = (1 << 1),
- COMP_INIT = (1 << 2),
- COMP_RECV = (1 << 3),
- COMP_POWER = (1 << 6),
- COMP_SWBW = (1 << 8),
- COMP_SEC = (1 << 9),
- COMP_LPS = (1 << 10),
- COMP_QOS = (1 << 11),
- COMP_RATE = (1 << 12),
- COMP_RXDESC = (1 << 13),
- COMP_PHY = (1 << 14),
- COMP_DIG = (1 << 15),
- COMP_TXAGC = (1 << 16),
- COMP_HALDM = (1 << 17),
- COMP_POWER_TRACKING = (1 << 18),
- COMP_CH = (1 << 19),
- COMP_RF = (1 << 20),
- COMP_FIRMWARE = (1 << 21),
- COMP_RESET = (1 << 23),
- COMP_CMDPKT = (1 << 24),
- COMP_SCAN = (1 << 25),
- COMP_PS = (1 << 26),
- COMP_DOWN = (1 << 27),
- COMP_INTR = (1 << 28),
- COMP_ERR = (1 << 31)
+ COMP_TRACE = BIT(0),
+ COMP_DBG = BIT(1),
+ COMP_INIT = BIT(2),
+ COMP_RECV = BIT(3),
+ COMP_POWER = BIT(6),
+ COMP_SWBW = BIT(8),
+ COMP_SEC = BIT(9),
+ COMP_LPS = BIT(10),
+ COMP_QOS = BIT(11),
+ COMP_RATE = BIT(12),
+ COMP_RXDESC = BIT(13),
+ COMP_PHY = BIT(14),
+ COMP_DIG = BIT(15),
+ COMP_TXAGC = BIT(16),
+ COMP_HALDM = BIT(17),
+ COMP_POWER_TRACKING = BIT(18),
+ COMP_CH = BIT(19),
+ COMP_RF = BIT(20),
+ COMP_FIRMWARE = BIT(21),
+ COMP_RESET = BIT(23),
+ COMP_CMDPKT = BIT(24),
+ COMP_SCAN = BIT(25),
+ COMP_PS = BIT(26),
+ COMP_DOWN = BIT(27),
+ COMP_INTR = BIT(28),
+ COMP_ERR = BIT(31)
};

#define RT_TRACE(component, x, args...) \
--
2.30.2
\
 
 \ /
  Last update: 2022-02-18 16:30    [W:0.164 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site