lkml.org 
[lkml]   [2022]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v8 05/19] drm/mediatek: dpi: move dpi limits to board config
Date
Add flexibility by moving the dpi limits to the board config

Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
---
drivers/gpu/drm/mediatek/mtk_dpi.c | 25 ++++++++++++++++---------
1 file changed, 16 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 4554e2de14309..4746eb3425674 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -125,6 +125,7 @@ struct mtk_dpi_conf {
bool edge_sel_en;
const u32 *output_fmts;
u32 num_output_fmts;
+ const struct mtk_dpi_yc_limit *limit;
};

static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
@@ -235,9 +236,10 @@ static void mtk_dpi_config_fb_size(struct mtk_dpi *dpi, u32 width, u32 height)
mtk_dpi_mask(dpi, DPI_SIZE, height << VSIZE, VSIZE_MASK);
}

-static void mtk_dpi_config_channel_limit(struct mtk_dpi *dpi,
- struct mtk_dpi_yc_limit *limit)
+static void mtk_dpi_config_channel_limit(struct mtk_dpi *dpi)
{
+ const struct mtk_dpi_yc_limit *limit = dpi->conf->limit;
+
mtk_dpi_mask(dpi, DPI_Y_LIMIT, limit->y_bottom << Y_LIMINT_BOT,
Y_LIMINT_BOT_MASK);
mtk_dpi_mask(dpi, DPI_Y_LIMIT, limit->y_top << Y_LIMINT_TOP,
@@ -449,7 +451,6 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
struct drm_display_mode *mode)
{
- struct mtk_dpi_yc_limit limit;
struct mtk_dpi_polarities dpi_pol;
struct mtk_dpi_sync_param hsync;
struct mtk_dpi_sync_param vsync_lodd = { 0 };
@@ -484,11 +485,6 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
dev_dbg(dpi->dev, "Got PLL %lu Hz, pixel clock %lu Hz\n",
pll_rate, vm.pixelclock);

- limit.c_bottom = 0x0010;
- limit.c_top = 0x0FE0;
- limit.y_bottom = 0x0010;
- limit.y_top = 0x0FE0;
-
dpi_pol.ck_pol = MTK_DPI_POLARITY_FALLING;
dpi_pol.de_pol = MTK_DPI_POLARITY_RISING;
dpi_pol.hsync_pol = vm.flags & DISPLAY_FLAGS_HSYNC_HIGH ?
@@ -536,7 +532,7 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
else
mtk_dpi_config_fb_size(dpi, vm.hactive, vm.vactive);

- mtk_dpi_config_channel_limit(dpi, &limit);
+ mtk_dpi_config_channel_limit(dpi);
mtk_dpi_config_bit_num(dpi, dpi->bit_num);
mtk_dpi_config_channel_swap(dpi, dpi->channel_swap);
mtk_dpi_config_yc_map(dpi, dpi->yc_map);
@@ -790,12 +786,20 @@ static const u32 mt8183_output_fmts[] = {
MEDIA_BUS_FMT_RGB888_2X12_BE,
};

+static const struct mtk_dpi_yc_limit mtk_dpi_limit = {
+ .c_bottom = 0x0010,
+ .c_top = 0x0FE0,
+ .y_bottom = 0x0010,
+ .y_top = 0x0FE0,
+};
+
static const struct mtk_dpi_conf mt8173_conf = {
.cal_factor = mt8173_calculate_factor,
.reg_h_fre_con = 0xe0,
.max_clock_khz = 300000,
.output_fmts = mt8173_output_fmts,
.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
+ .limit = &mtk_dpi_limit,
};

static const struct mtk_dpi_conf mt2701_conf = {
@@ -805,6 +809,7 @@ static const struct mtk_dpi_conf mt2701_conf = {
.max_clock_khz = 150000,
.output_fmts = mt8173_output_fmts,
.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
+ .limit = &mtk_dpi_limit,
};

static const struct mtk_dpi_conf mt8183_conf = {
@@ -813,6 +818,7 @@ static const struct mtk_dpi_conf mt8183_conf = {
.max_clock_khz = 100000,
.output_fmts = mt8183_output_fmts,
.num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
+ .limit = &mtk_dpi_limit,
};

static const struct mtk_dpi_conf mt8192_conf = {
@@ -821,6 +827,7 @@ static const struct mtk_dpi_conf mt8192_conf = {
.max_clock_khz = 150000,
.output_fmts = mt8173_output_fmts,
.num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
+ .limit = &mtk_dpi_limit,
};

static int mtk_dpi_probe(struct platform_device *pdev)
--
2.34.1
\
 
 \ /
  Last update: 2022-02-18 15:57    [W:0.423 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site