lkml.org 
[lkml]   [2022]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 28/32] mtd: spi-nor: move all spansion specifics into spansion.c
Date
The clear status register flags is only available on spansion flashes.
Move all the functions around that into the spanion module.

Signed-off-by: Michael Walle <michael@walle.cc>
---
drivers/mtd/spi-nor/core.c | 49 ------------------------
drivers/mtd/spi-nor/spansion.c | 70 ++++++++++++++++++++++++++++++++++
include/linux/mtd/spi-nor.h | 1 -
3 files changed, 70 insertions(+), 50 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index ac0faedebafe..e2b8b0a438ce 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -554,33 +554,6 @@ int spi_nor_write_ear(struct spi_nor *nor, u8 ear)
return ret;
}

-/**
- * spi_nor_clear_sr() - Clear the Status Register.
- * @nor: pointer to 'struct spi_nor'.
- */
-static void spi_nor_clear_sr(struct spi_nor *nor)
-{
- int ret;
-
- if (nor->spimem) {
- struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLSR, 0),
- SPI_MEM_OP_NO_ADDR,
- SPI_MEM_OP_NO_DUMMY,
- SPI_MEM_OP_NO_DATA);
-
- spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
-
- ret = spi_mem_exec_op(nor->spimem, &op);
- } else {
- ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_CLSR,
- NULL, 0);
- }
-
- if (ret)
- dev_dbg(nor->dev, "error %d clearing SR\n", ret);
-}
-
/**
* spi_nor_sr_ready() - Query the Status Register to see if the flash is ready
* for new commands.
@@ -595,28 +568,6 @@ int spi_nor_sr_ready(struct spi_nor *nor)
if (ret)
return ret;

- if (nor->flags & SNOR_F_USE_CLSR &&
- nor->bouncebuf[0] & (SR_E_ERR | SR_P_ERR)) {
- if (nor->bouncebuf[0] & SR_E_ERR)
- dev_err(nor->dev, "Erase Error occurred\n");
- else
- dev_err(nor->dev, "Programming Error occurred\n");
-
- spi_nor_clear_sr(nor);
-
- /*
- * WEL bit remains set to one when an erase or page program
- * error occurs. Issue a Write Disable command to protect
- * against inadvertent writes that can possibly corrupt the
- * contents of the memory.
- */
- ret = spi_nor_write_disable(nor);
- if (ret)
- return ret;
-
- return -EIO;
- }
-
return !(nor->bouncebuf[0] & SR_WIP);
}

diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 86665e55970d..f7d781194850 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -8,6 +8,7 @@

#include "core.h"

+#define SPINOR_OP_CLSR 0x30 /* Clear status register 1 */
#define SPINOR_OP_RD_ANY_REG 0x65 /* Read any register */
#define SPINOR_OP_WR_ANY_REG 0x71 /* Write any register */
#define SPINOR_REG_CYPRESS_CFR2V 0x00800003
@@ -294,6 +295,72 @@ static const struct flash_info spansion_nor_parts[] = {
},
};

+/**
+ * spi_nor_clear_sr() - Clear the Status Register.
+ * @nor: pointer to 'struct spi_nor'.
+ */
+static void spi_nor_clear_sr(struct spi_nor *nor)
+{
+ int ret;
+
+ if (nor->spimem) {
+ struct spi_mem_op op =
+ SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLSR, 0),
+ SPI_MEM_OP_NO_ADDR,
+ SPI_MEM_OP_NO_DUMMY,
+ SPI_MEM_OP_NO_DATA);
+
+ spi_nor_spimem_setup_op(nor, &op, nor->reg_proto);
+
+ ret = spi_mem_exec_op(nor->spimem, &op);
+ } else {
+ ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_CLSR,
+ NULL, 0);
+ }
+
+ if (ret)
+ dev_dbg(nor->dev, "error %d clearing SR\n", ret);
+}
+
+/**
+ * spi_nor_sr_ready_and_clear() - Query the Status Register to see if the flash
+ * is ready for new commands and clear it.
+ * @nor: pointer to 'struct spi_nor'.
+ *
+ * Return: 1 if ready, 0 if not ready, -errno on errors.
+ */
+static int spi_nor_sr_ready_and_clear(struct spi_nor *nor)
+{
+ int ret;
+
+ ret = spi_nor_read_sr(nor, nor->bouncebuf);
+ if (ret)
+ return ret;
+
+ if (nor->bouncebuf[0] & (SR_E_ERR | SR_P_ERR)) {
+ if (nor->bouncebuf[0] & SR_E_ERR)
+ dev_err(nor->dev, "Erase Error occurred\n");
+ else
+ dev_err(nor->dev, "Programming Error occurred\n");
+
+ spi_nor_clear_sr(nor);
+
+ /*
+ * WEL bit remains set to one when an erase or page program
+ * error occurs. Issue a Write Disable command to protect
+ * against inadvertent writes that can possibly corrupt the
+ * contents of the memory.
+ */
+ ret = spi_nor_write_disable(nor);
+ if (ret)
+ return ret;
+
+ return -EIO;
+ }
+
+ return !(nor->bouncebuf[0] & SR_WIP);
+}
+
static void spansion_nor_late_init(struct spi_nor *nor)
{
if (nor->params->size > SZ_16M) {
@@ -302,6 +369,9 @@ static void spansion_nor_late_init(struct spi_nor *nor)
nor->erase_opcode = SPINOR_OP_SE;
nor->mtd.erasesize = nor->info->sector_size;
}
+
+ if (nor->flags & SNOR_F_USE_CLSR)
+ nor->params->ready = spi_nor_sr_ready_and_clear;
}

static const struct spi_nor_fixups spansion_nor_fixups = {
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 4622251a79ff..5e25a7b75ae2 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -90,7 +90,6 @@

/* Used for Spansion flashes only. */
#define SPINOR_OP_BRWR 0x17 /* Bank register write */
-#define SPINOR_OP_CLSR 0x30 /* Clear status register 1 */

/* Used for Micron flashes only. */
#define SPINOR_OP_RD_EVCR 0x65 /* Read EVCR register */
--
2.30.2
\
 
 \ /
  Last update: 2022-02-18 12:39    [W:0.114 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site