lkml.org 
[lkml]   [2022]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 22/32] mtd: spi-nor: xilinx: rename vendor specific functions and defines
Date
Drop the generic spi_nor prefix for all the xilinx functions.

Signed-off-by: Michael Walle <michael@walle.cc>
---
drivers/mtd/spi-nor/xilinx.c | 30 +++++++++++++++---------------
1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/drivers/mtd/spi-nor/xilinx.c b/drivers/mtd/spi-nor/xilinx.c
index 2140d6b2bb02..c098c50379b4 100644
--- a/drivers/mtd/spi-nor/xilinx.c
+++ b/drivers/mtd/spi-nor/xilinx.c
@@ -8,9 +8,9 @@

#include "core.h"

-#define SPINOR_OP_XSE 0x50 /* Sector erase */
-#define SPINOR_OP_XPP 0x82 /* Page program */
-#define SPINOR_OP_XRDSR 0xd7 /* Read status register */
+#define XILINX_OP_SE 0x50 /* Sector erase */
+#define XILINX_OP_PP 0x82 /* Page program */
+#define XILINX_OP_RDSR 0xd7 /* Read status register */

#define XSR_PAGESIZE BIT(0) /* Page size in Po2 or Linear */
#define XSR_RDY BIT(7) /* Ready */
@@ -60,20 +60,20 @@ static u32 s3an_convert_addr(struct spi_nor *nor, u32 addr)
}

/**
- * spi_nor_xread_sr() - Read the Status Register on S3AN flashes.
+ * xilinx_nor_read_sr() - Read the Status Register on S3AN flashes.
* @nor: pointer to 'struct spi_nor'.
* @sr: pointer to a DMA-able buffer where the value of the
* Status Register will be written.
*
* Return: 0 on success, -errno otherwise.
*/
-static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
+static int xilinx_nor_read_sr(struct spi_nor *nor, u8 *sr)
{
int ret;

if (nor->spimem) {
struct spi_mem_op op =
- SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_XRDSR, 0),
+ SPI_MEM_OP(SPI_MEM_OP_CMD(XILINX_OP_RDSR, 0),
SPI_MEM_OP_NO_ADDR,
SPI_MEM_OP_NO_DUMMY,
SPI_MEM_OP_DATA_IN(1, sr, 0));
@@ -82,7 +82,7 @@ static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)

ret = spi_mem_exec_op(nor->spimem, &op);
} else {
- ret = spi_nor_controller_ops_read_reg(nor, SPINOR_OP_XRDSR, sr,
+ ret = spi_nor_controller_ops_read_reg(nor, XILINX_OP_RDSR, sr,
1);
}

@@ -93,17 +93,17 @@ static int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr)
}

/**
- * spi_nor_xsr_ready() - Query the Status Register of the S3AN flash to see if
- * the flash is ready for new commands.
+ * xilinx_nor_sr_ready() - Query the Status Register of the S3AN flash to see
+ * if the flash is ready for new commands.
* @nor: pointer to 'struct spi_nor'.
*
* Return: 1 if ready, 0 if not ready, -errno on errors.
*/
-static int spi_nor_xsr_ready(struct spi_nor *nor)
+static int xilinx_nor_sr_ready(struct spi_nor *nor)
{
int ret;

- ret = spi_nor_xread_sr(nor, nor->bouncebuf);
+ ret = xilinx_nor_read_sr(nor, nor->bouncebuf);
if (ret)
return ret;

@@ -116,12 +116,12 @@ static int xilinx_nor_setup(struct spi_nor *nor,
u32 page_size;
int ret;

- ret = spi_nor_xread_sr(nor, nor->bouncebuf);
+ ret = xilinx_nor_read_sr(nor, nor->bouncebuf);
if (ret)
return ret;

- nor->erase_opcode = SPINOR_OP_XSE;
- nor->program_opcode = SPINOR_OP_XPP;
+ nor->erase_opcode = XILINX_OP_SE;
+ nor->program_opcode = XILINX_OP_PP;
nor->read_opcode = SPINOR_OP_READ;
nor->flags |= SNOR_F_NO_OP_CHIP_ERASE;

@@ -155,7 +155,7 @@ static int xilinx_nor_setup(struct spi_nor *nor,
static void xilinx_nor_late_init(struct spi_nor *nor)
{
nor->params->setup = xilinx_nor_setup;
- nor->params->ready = spi_nor_xsr_ready;
+ nor->params->ready = xilinx_nor_sr_ready;
}

static const struct spi_nor_fixups xilinx_nor_fixups = {
--
2.30.2
\
 
 \ /
  Last update: 2022-02-18 12:38    [W:0.116 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site