lkml.org 
[lkml]   [2022]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V7 1/5] dt-bindings: mfd: pm8008: Add pm8008 regulators
Date
Add regulators and their supply nodes. Add separate compatible
"qcom,pm8008-regulators" to differentiate between pm8008 infra
and pm8008 regulators mfd devices.

Signed-off-by: Satya Priya <quic_c_skakit@quicinc.com>
---
Changes in V2:
- As per Rob's comments changed "pm8008[a-z]?-regulator" to
"^pm8008[a-z]?-regulators".

Changes in V3:
- Fixed bot errors.
- As per stephen's comments, changed "^pm8008[a-z]?-regulators$" to
"regulators".

Changes in V4:
- Changed compatible string to "qcom,pm8008-regulators"

Changes in V5:
- Remove compatible for regulators node.
- Move supply nodes of the regulators to chip level.

Changes in V6:
- No changes.

Changes in V7:
- Removed the intermediate regulators node and added ldos
directly under mfd node.

.../devicetree/bindings/mfd/qcom,pm8008.yaml | 50 +++++++++++++++++++---
1 file changed, 43 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index ec3138c..6b3b53e 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -16,7 +16,9 @@ description: |

properties:
compatible:
- const: qcom,pm8008
+ enum:
+ - qcom,pm8008
+ - qcom,pm8008-regulators

reg:
description:
@@ -44,6 +46,21 @@ properties:
"#size-cells":
const: 0

+ vdd_l1_l2-supply:
+ description: Input supply phandle of ldo1 and ldo2 regulators.
+
+ vdd_l3_l4-supply:
+ description: Input supply phandle of ldo3 and ldo4 regulators.
+
+ vdd_l5-supply:
+ description: Input supply phandle of ldo5 regulator.
+
+ vdd_l6-supply:
+ description: Input supply phandle of ldo6 regulator.
+
+ vdd_l7-supply:
+ description: Input supply phandle of ldo7 regulator.
+
patternProperties:
"^gpio@[0-9a-f]+$":
type: object
@@ -85,13 +102,16 @@ patternProperties:

additionalProperties: false

+ "^ldo[1-7]$":
+ type: object
+ $ref: "../regulator/regulator.yaml#"
+ description: PM8008 regulator peripherals of PM8008 regulator device
+
required:
- compatible
- reg
- - interrupts
- "#address-cells"
- "#size-cells"
- - "#interrupt-cells"

additionalProperties: false

@@ -102,13 +122,11 @@ examples:
qupv3_se13_i2c {
#address-cells = <1>;
#size-cells = <0>;
- pm8008i@8 {
+ pm8008_infra: pm8008@8 {
compatible = "qcom,pm8008";
reg = <0x8>;
#address-cells = <1>;
#size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <2>;

interrupt-parent = <&tlmm>;
interrupts = <32 IRQ_TYPE_EDGE_RISING>;
@@ -123,6 +141,24 @@ examples:
#interrupt-cells = <2>;
};
};
- };

+ pm8008_regulators: pm8008@9 {
+ compatible = "qcom,pm8008-regulators";
+ reg = <0x9>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_l1_l2-supply = <&vreg_s8b_1p2>;
+ vdd_l3_l4-supply = <&vreg_s1b_1p8>;
+ vdd_l5-supply = <&vreg_bob>;
+ vdd_l6-supply = <&vreg_bob>;
+ vdd_l7-supply = <&vreg_bob>;
+
+ pm8008_l1: ldo1 {
+ regulator-name = "pm8008_l1";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ };
+ };
+ };
...
--
2.7.4
\
 
 \ /
  Last update: 2022-02-18 12:01    [W:0.101 / U:3.696 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site