lkml.org 
[lkml]   [2022]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] simpldrm: Enable boot time VESA graphic mode selection.
Date
Since switch to simpledrm VESA graphic modes are no longer available
with legacy BIOS.

The x86 realmode boot code enables the VESA graphic modes when option
FB_BOOT_VESA_SUPPORT is enabled.

To enable use of VESA modes with simpledrm in legacy BIOS boot mode drop
dependency of BOOT_VESA_SUPPORT on FB, also drop the FB_ prefix, and
select the option when simpledrm is built-in on x86.

Fixes: 11e8f5fd223b ("drm: Add simpledrm driver")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
---
arch/x86/boot/video-vesa.c | 4 ++--
drivers/gpu/drm/tiny/Kconfig | 1 +
drivers/video/fbdev/Kconfig | 9 ++++-----
3 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c
index 7e185977a984..c2c6d35e3a43 100644
--- a/arch/x86/boot/video-vesa.c
+++ b/arch/x86/boot/video-vesa.c
@@ -83,7 +83,7 @@ static int vesa_probe(void)
(vminfo.memory_layout == 4 ||
vminfo.memory_layout == 6) &&
vminfo.memory_planes == 1) {
-#ifdef CONFIG_FB_BOOT_VESA_SUPPORT
+#ifdef CONFIG_BOOT_VESA_SUPPORT
/* Graphics mode, color, linear frame buffer
supported. Only register the mode if
if framebuffer is configured, however,
@@ -121,7 +121,7 @@ static int vesa_set_mode(struct mode_info *mode)
if ((vminfo.mode_attr & 0x15) == 0x05) {
/* It's a supported text mode */
is_graphic = 0;
-#ifdef CONFIG_FB_BOOT_VESA_SUPPORT
+#ifdef CONFIG_BOOT_VESA_SUPPORT
} else if ((vminfo.mode_attr & 0x99) == 0x99) {
/* It's a graphics mode with linear frame buffer */
is_graphic = 1;
diff --git a/drivers/gpu/drm/tiny/Kconfig b/drivers/gpu/drm/tiny/Kconfig
index 712e0004e96e..1bc30c64ed15 100644
--- a/drivers/gpu/drm/tiny/Kconfig
+++ b/drivers/gpu/drm/tiny/Kconfig
@@ -54,6 +54,7 @@ config DRM_GM12U320
config DRM_SIMPLEDRM
tristate "Simple framebuffer driver"
depends on DRM && MMU
+ select BOOT_VESA_SUPPORT if X86 && DRM_SIMPLEDRM = y
select DRM_GEM_SHMEM_HELPER
select DRM_KMS_HELPER
help
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 6ed5e608dd04..4f3be9b7a520 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -66,9 +66,8 @@ config FB_DDC
select I2C_ALGOBIT
select I2C

-config FB_BOOT_VESA_SUPPORT
+config BOOT_VESA_SUPPORT
bool
- depends on FB
help
If true, at least one selected framebuffer driver can take advantage
of VESA video modes set at an early boot stage via the vga= parameter.
@@ -627,7 +626,7 @@ config FB_VESA
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_BOOT_VESA_SUPPORT
+ select BOOT_VESA_SUPPORT
help
This is the frame buffer device driver for generic VESA 2.0
compliant graphic cards. The older VESA 1.2 cards are not supported.
@@ -1051,7 +1050,7 @@ config FB_INTEL
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
+ select BOOT_VESA_SUPPORT if FB_INTEL = y
depends on !DRM_I915
help
This driver supports the on-board graphics built in to the Intel
@@ -1378,7 +1377,7 @@ config FB_SIS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select FB_BOOT_VESA_SUPPORT if FB_SIS = y
+ select BOOT_VESA_SUPPORT if FB_SIS = y
select FB_SIS_300 if !FB_SIS_315
help
This is the frame buffer device driver for the SiS 300, 315, 330
--
2.31.1
\
 
 \ /
  Last update: 2022-02-18 10:34    [W:0.140 / U:1.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site