lkml.org 
[lkml]   [2022]   [Feb]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 2/3] hwmon (xdpe12284): Add support for xdpe11280
From
Date
On Thu, 2022-02-17 at 07:20 -0800, Guenter Roeck wrote:
> On 2/17/22 06:41, Marcello Sylvester Bauer wrote:
> > Add support for another family of Infineon Multi-phase controllers.
> > The xdpe11280 uses linear instead of vid data format for VOUT.
> > Add the required logic to detect VOUT_MODE during identification,
> > and set the format accordingly.
> >
> This talks about the chip, but ...

Oh, sure. I should be more clear that it is a chip of a different
family.

>
> > Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io>
> > ---
> >   Documentation/hwmon/xdpe12284.rst | 10 +++++++---
> >   drivers/hwmon/pmbus/xdpe12284.c   | 17 ++++++++++++++++-
> >   2 files changed, 23 insertions(+), 4 deletions(-)
> >
> > diff --git a/Documentation/hwmon/xdpe12284.rst
> > b/Documentation/hwmon/xdpe12284.rst
> > index 67d1f87808e5..e9a5a19b0c3d 100644
> > --- a/Documentation/hwmon/xdpe12284.rst
> > +++ b/Documentation/hwmon/xdpe12284.rst
> > @@ -5,6 +5,10 @@ Kernel driver xdpe122
> >  
> >   Supported chips:
> >  
> > +  * Infineon XDPE11280
> > +
> > +    Prefix: 'xdpe11280'
> > +
> >     * Infineon XDPE12254
> >  
> >       Prefix: 'xdpe12254'
> > @@ -20,9 +24,9 @@ Authors:
> >   Description
> >   -----------
> >  
> > -This driver implements support for Infineon Multi-phase XDPE122
> > family
> > -dual loop voltage regulators.
> > -The family includes XDPE12284 and XDPE12254 devices.
> > +This driver implements support for Infineon Multi-phase XDPE112
> > and XDPE122
> > +family dual loop voltage regulators.
> > +These families include XDPE11280, XDPE12284 and XDPE12254 devices.
> >   The devices from this family complaint with:
>
> Hmm, s/complaint/compliant/.

ack

>
> Anyway, is it still correct that the XDPE11280 is compliant with the
> Intel specifications ? The datasheet isn't public, so I can not check
> myself
> what the chip actually supports.

The hardware we are testing on is an Intel Cascade Lake, which uses
this chip. The datasheet tells us it is compliant:

```
The XDPE11280B implements a fully compliant Intel® VR 13, VR12, VR
12.5, VR13.HC, and IMVP8 Serial VID (SVID)
interface.
```

>
> >  
> >   - Intel VR13 and VR13HC rev 1.3, IMVP8 rev 1.2 and IMPVP9 rev 1.3
> > DC-DC
> > diff --git a/drivers/hwmon/pmbus/xdpe12284.c
> > b/drivers/hwmon/pmbus/xdpe12284.c
> > index b07da06a40c9..ec947c697670 100644
> > --- a/drivers/hwmon/pmbus/xdpe12284.c
> > +++ b/drivers/hwmon/pmbus/xdpe12284.c
> > @@ -27,6 +27,9 @@ static int xdpe122_read_word_data(struct
> > i2c_client *client, int page,
> >         s32 mantissa;
> >         int ret;
> >  
> > +       if (info->format[PSC_VOLTAGE_OUT] == linear)
> > +               return -ENODATA;
> > +
> >         switch (reg) {
> >         case PMBUS_VOUT_OV_FAULT_LIMIT:
> >         case PMBUS_VOUT_UV_FAULT_LIMIT:
> > @@ -75,9 +78,19 @@ static int xdpe122_read_word_data(struct
> > i2c_client *client, int page,
> >   static int xdpe122_identify(struct i2c_client *client,
> >                             struct pmbus_driver_info *info)
> >   {
> > -       u8 vout_params;
> > +       u8 vout_mode, vout_params;
> >         int i, ret;
> >  
> > +       ret = pmbus_read_byte_data(client, 0, PMBUS_VOUT_MODE);
> > +       if (ret < 0)
> > +               return ret;
> > +
> > +       vout_mode = ret >> 5;
> > +       if (vout_mode == 0) {
> > +               info->format[PSC_VOLTAGE_OUT] = linear;
> > +               return 0;
> > +       }
>
> .... the code above is not chip dependent but this code checks the
> mode register on page 0. At the very least this is confusing.
>
> What the driver should do instead is to check the chip type during
> probe and make the necessary changes there, ie set the output format
> for xdpe11280 to linear and drop the pointers to the .identify
> and .read_word_data.

Sgtm. This sounds like a better approach indeed.

Thanks,
Marcello

>
> Guenter
>
> > +
> >         for (i = 0; i < XDPE122_PAGE_NUM; i++) {
> >                 /* Read the register with VOUT scaling value.*/
> >                 ret = pmbus_read_byte_data(client, i,
> > PMBUS_VOUT_MODE);
> > @@ -140,6 +153,7 @@ static int xdpe122_probe(struct i2c_client
> > *client)
> >   }
> >  
> >   static const struct i2c_device_id xdpe122_id[] = {
> > +       {"xdpe11280", 0},
> >         {"xdpe12254", 0},
> >         {"xdpe12284", 0},
> >         {}
> > @@ -148,6 +162,7 @@ static const struct i2c_device_id xdpe122_id[]
> > = {
> >   MODULE_DEVICE_TABLE(i2c, xdpe122_id);
> >  
> >   static const struct of_device_id __maybe_unused
> > xdpe122_of_match[] = {
> > +       {.compatible = "infineon,xdpe11280"},
> >         {.compatible = "infineon,xdpe12254"},
> >         {.compatible = "infineon,xdpe12284"},
> >         {}
>

\
 
 \ /
  Last update: 2022-02-17 17:40    [W:0.062 / U:0.808 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site