lkml.org 
[lkml]   [2022]   [Feb]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/6] mm/page_alloc: Free pages in a single pass during bulk free
On Thu, Feb 17, 2022 at 12:22:26AM +0000, Mel Gorman wrote:
> free_pcppages_bulk() has taken two passes through the pcp lists since
> commit 0a5f4e5b4562 ("mm/free_pcppages_bulk: do not hold lock when picking
> pages to free") due to deferring the cost of selecting PCP lists until
> the zone lock is held. Now that list selection is simplier, the main
> cost during selection is bulkfree_pcp_prepare() which in the normal case
> is a simple check and prefetching. As the list manipulations have cost
> in itself, go back to freeing pages in a single pass.
>
> The series up to this point was evaulated using a trunc microbenchmark
> that is truncating sparse files stored in page cache (mmtests config
> config-io-trunc). Sparse files were used to limit filesystem interaction.
> The results versus a revert of storing high-order pages in the PCP lists is
>
> 1-socket Skylake
> 5.17.0-rc3 5.17.0-rc3 5.17.0-rc3
> vanilla mm-reverthighpcp-v1 mm-highpcpopt-v2
> Min elapsed 540.00 ( 0.00%) 530.00 ( 1.85%) 530.00 ( 1.85%)
> Amean elapsed 543.00 ( 0.00%) 530.00 * 2.39%* 530.00 * 2.39%*
> Stddev elapsed 4.83 ( 0.00%) 0.00 ( 100.00%) 0.00 ( 100.00%)
> CoeffVar elapsed 0.89 ( 0.00%) 0.00 ( 100.00%) 0.00 ( 100.00%)
> Max elapsed 550.00 ( 0.00%) 530.00 ( 3.64%) 530.00 ( 3.64%)
> BAmean-50 elapsed 540.00 ( 0.00%) 530.00 ( 1.85%) 530.00 ( 1.85%)
> BAmean-95 elapsed 542.22 ( 0.00%) 530.00 ( 2.25%) 530.00 ( 2.25%)
> BAmean-99 elapsed 542.22 ( 0.00%) 530.00 ( 2.25%) 530.00 ( 2.25%)
>
> 2-socket CascadeLake
> 5.17.0-rc3 5.17.0-rc3 5.17.0-rc3
> vanilla mm-reverthighpcp-v1 mm-highpcpopt-v2
> Min elapsed 510.00 ( 0.00%) 500.00 ( 1.96%) 500.00 ( 1.96%)
> Amean elapsed 529.00 ( 0.00%) 521.00 ( 1.51%) 510.00 * 3.59%*
> Stddev elapsed 16.63 ( 0.00%) 12.87 ( 22.64%) 11.55 ( 30.58%)
> CoeffVar elapsed 3.14 ( 0.00%) 2.47 ( 21.46%) 2.26 ( 27.99%)
> Max elapsed 550.00 ( 0.00%) 540.00 ( 1.82%) 530.00 ( 3.64%)
> BAmean-50 elapsed 516.00 ( 0.00%) 512.00 ( 0.78%) 500.00 ( 3.10%)
> BAmean-95 elapsed 526.67 ( 0.00%) 518.89 ( 1.48%) 507.78 ( 3.59%)
> BAmean-99 elapsed 526.67 ( 0.00%) 518.89 ( 1.48%) 507.78 ( 3.59%)
>
> The original motivation for multi-passes was will-it-scale page_fault1
> using $nr_cpu processes.
>
> 2-socket CascadeLake (40 cores, 80 CPUs HT enabled)
> 5.17.0-rc3 5.17.0-rc3
> vanilla mm-highpcpopt-v2
> Hmean page_fault1-processes-2 2694662.26 ( 0.00%) 2695780.35 ( 0.04%)
> Hmean page_fault1-processes-5 6425819.34 ( 0.00%) 6435544.57 * 0.15%*
> Hmean page_fault1-processes-8 9642169.10 ( 0.00%) 9658962.39 ( 0.17%)
> Hmean page_fault1-processes-12 12167502.10 ( 0.00%) 12190163.79 ( 0.19%)
> Hmean page_fault1-processes-21 15636859.03 ( 0.00%) 15612447.26 ( -0.16%)
> Hmean page_fault1-processes-30 25157348.61 ( 0.00%) 25169456.65 ( 0.05%)
> Hmean page_fault1-processes-48 27694013.85 ( 0.00%) 27671111.46 ( -0.08%)
> Hmean page_fault1-processes-79 25928742.64 ( 0.00%) 25934202.02 ( 0.02%) <--
> Hmean page_fault1-processes-110 25730869.75 ( 0.00%) 25671880.65 * -0.23%*
> Hmean page_fault1-processes-141 25626992.42 ( 0.00%) 25629551.61 ( 0.01%)
> Hmean page_fault1-processes-172 25611651.35 ( 0.00%) 25614927.99 ( 0.01%)
> Hmean page_fault1-processes-203 25577298.75 ( 0.00%) 25583445.59 ( 0.02%)
> Hmean page_fault1-processes-234 25580686.07 ( 0.00%) 25608240.71 ( 0.11%)
> Hmean page_fault1-processes-265 25570215.47 ( 0.00%) 25568647.58 ( -0.01%)
> Hmean page_fault1-processes-296 25549488.62 ( 0.00%) 25543935.00 ( -0.02%)
> Hmean page_fault1-processes-320 25555149.05 ( 0.00%) 25575696.74 ( 0.08%)
>
> The differences are mostly within the noise and the difference close to
> $nr_cpus is negligible.

I have queued will-it-scale/page_fault1/processes/$nr_cpu on 2 4-sockets
servers: CascadeLake and CooperLaker and will let you know the result
once it's out.

I'm using 'https://github.com/hnaz/linux-mm master' and doing the
comparison with commit c000d687ce22("mm/page_alloc: simplify how many
pages are selected per pcp list during bulk free") and commit 8391e0a7e172
("mm/page_alloc: free pages in a single pass during bulk free") there.

The kernel for each commit will have to be fetched and built and then
the job will be run for 3 times for each commit. These servers are also
busy with other jobs so it may take a while.

Regards,
Aaron

\
 
 \ /
  Last update: 2022-02-17 02:54    [W:0.188 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site