lkml.org 
[lkml]   [2022]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [RFC PATCH] watchdog: da9062: Correct the timeout values [Klartext]
Date
On 14 February 2022 18:03, Christoph Niedermaier wrote:

> I come to the conclusion that under normal condition (room temperature) the
> timeout values could be improved, but due to the used internal ring oscillator
> on the DA9061 chip under extreme conditions like automotive (125 degrees) the
> values come close to the DA9062 timeout values, if an external oscillator
> is used. In order not to trigger too early in extreme situations, the values
> must be left as they are. But I told Dialog to add a note in the data sheet
> explaining the deviation when the internal oscillator is used (DA9061).
>
> Thanks for helping me and best regards
> Christoph

Thanks for the update. I'll also push internally for the Datasheet update
so this is clearer in the future, to avoid any misunderstandings.
\
 
 \ /
  Last update: 2022-02-15 10:17    [W:0.056 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site