lkml.org 
[lkml]   [2022]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] net: ethernet: xilinx: cleanup comments
Date
> -----Original Message-----
> From: trix@redhat.com <trix@redhat.com>
> Sent: Wednesday, February 16, 2022 12:35 AM
> To: davem@davemloft.net; kuba@kernel.org; Michal Simek
> <michals@xilinx.com>; Radhey Shyam Pandey <radheys@xilinx.com>;
> gary@garyguo.net; rdunlap@infradead.org; esben@geanix.com;
> huangguangbin2@huawei.com; michael@walle.cc; moyufeng@huawei.com;
> arnd@arndb.de; chenhao288@hisilicon.com; andrew@lunn.ch;
> prabhakar.mahadev-lad.rj@bp.renesas.com; yuehaibing@huawei.com
> Cc: netdev@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; Tom Rix <trix@redhat.com>
> Subject: [PATCH] net: ethernet: xilinx: cleanup comments
>
> From: Tom Rix <trix@redhat.com>
>
> Remove the second 'the'.
> Replacements:
> endiannes to endianness
> areconnected to are connected
> Mamagement to Management
> undoccumented to undocumented
> Xilink to Xilinx
> strucutre to structure
>
> Signed-off-by: Tom Rix <trix@redhat.com>

Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Thanks!

> ---
> drivers/net/ethernet/xilinx/Kconfig | 2 +-
> drivers/net/ethernet/xilinx/ll_temac.h | 4 ++--
> drivers/net/ethernet/xilinx/ll_temac_main.c | 2 +-
> drivers/net/ethernet/xilinx/xilinx_axienet_main.c | 2 +-
> drivers/net/ethernet/xilinx/xilinx_emaclite.c | 2 +-
> 5 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/ethernet/xilinx/Kconfig
> b/drivers/net/ethernet/xilinx/Kconfig
> index 911b5ef9e680..0014729b8865 100644
> --- a/drivers/net/ethernet/xilinx/Kconfig
> +++ b/drivers/net/ethernet/xilinx/Kconfig
> @@ -1,6 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0-only # -# Xilink device configuration
> +# Xilinx device configuration
> #
>
> config NET_VENDOR_XILINX
> diff --git a/drivers/net/ethernet/xilinx/ll_temac.h
> b/drivers/net/ethernet/xilinx/ll_temac.h
> index 4a73127e10a6..ad8d29f84be6 100644
> --- a/drivers/net/ethernet/xilinx/ll_temac.h
> +++ b/drivers/net/ethernet/xilinx/ll_temac.h
> @@ -271,7 +271,7 @@ This option defaults to enabled (set) */
>
> #define XTE_TIE_OFFSET 0x000003A4 /* Interrupt
> enable */
>
> -/** MII Mamagement Control register (MGTCR) */
> +/** MII Management Control register (MGTCR) */
> #define XTE_MGTDR_OFFSET 0x000003B0 /* MII data */
> #define XTE_MIIMAI_OFFSET 0x000003B4 /* MII control */
>
> @@ -283,7 +283,7 @@ This option defaults to enabled (set) */
>
> #define STS_CTRL_APP0_ERR (1 << 31)
> #define STS_CTRL_APP0_IRQONEND (1 << 30)
> -/* undoccumented */
> +/* undocumented */
> #define STS_CTRL_APP0_STOPONEND (1 << 29)
> #define STS_CTRL_APP0_CMPLT (1 << 28)
> #define STS_CTRL_APP0_SOP (1 << 27)
> diff --git a/drivers/net/ethernet/xilinx/ll_temac_main.c
> b/drivers/net/ethernet/xilinx/ll_temac_main.c
> index b900ab5aef2a..7171b5cdec26 100644
> --- a/drivers/net/ethernet/xilinx/ll_temac_main.c
> +++ b/drivers/net/ethernet/xilinx/ll_temac_main.c
> @@ -1008,7 +1008,7 @@ static void ll_temac_recv(struct net_device *ndev)
> (skb->len > 64)) {
>
> /* Convert from device endianness (be32) to cpu
> - * endiannes, and if necessary swap the bytes
> + * endianness, and if necessary swap the bytes
> * (back) for proper IP checksum byte order
> * (be16).
> */
> diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> index de0a6372ae0e..6eeaab77fbe0 100644
> --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
> @@ -537,7 +537,7 @@ static int __axienet_device_reset(struct axienet_local
> *lp)
> * This function is called to reset and initialize the Axi Ethernet core. This
> * is typically called during initialization. It does a reset of the Axi DMA
> * Rx/Tx channels and initializes the Axi DMA BDs. Since Axi DMA reset lines
> - * areconnected to Axi Ethernet reset lines, this in turn resets the Axi
> + * are connected to Axi Ethernet reset lines, this in turn resets the
> + Axi
> * Ethernet core. No separate hardware reset is done for the Axi Ethernet
> * core.
> * Returns 0 on success or a negative error number otherwise.
> diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
> b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
> index 519599480b15..f65a638b7239 100644
> --- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
> +++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
> @@ -498,7 +498,7 @@ static void xemaclite_update_address(struct net_local
> *drvdata,
> * @dev: Pointer to the network device instance
> * @address: Void pointer to the sockaddr structure
> *
> - * This function copies the HW address from the sockaddr strucutre to the
> + * This function copies the HW address from the sockaddr structure to
> + the
> * net_device structure and updates the address in HW.
> *
> * Return: Error if the net device is busy or 0 if the addr is set
> --
> 2.26.3

\
 
 \ /
  Last update: 2022-02-15 21:15    [W:0.058 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site