lkml.org 
[lkml]   [2022]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/7] hwmon: (dell-smm) Allow for specifying fan control method as module parameter
On Tuesday 15 February 2022 20:44:20 Armin Wolf wrote:
> Am 15.02.22 um 20:19 schrieb Pali Rohár:
> > On Tuesday 15 February 2022 20:11:07 Armin Wolf wrote:
> > > Right now, the only way to test if setting manual/auto fan control works
> > > is to edit and recompile the module, which may be too cumbersome for
> > > the average user.
> > There is also another way suitable for testing purposes which do not
> > requires any kernel patch. Call iopl(3) syscall which changes I/O
> > privilege level to 3 and which allows to poke I/O registers.
> >
> This is not possible under kernel lockdown/Secure Boot.

Under Secure Boot it should be still possible.

With kernel lockdown, no kernel testing/debugging at HW level is
acceptable due to security reasons, as it is against what kernel
lockdown should achieve.

> > > Allow for specifying the desired fan mode control method when loading
> > > the module, but taint the kernel if so since there is the possibility
> > > for strange side effects on non-whitelisted models.
> > > Also update docs and kernel-parameters.txt accordingly.
> > >
> > > Tested on a Dell Inspiron 3505.
> > >
> > > Signed-off-by: Armin Wolf <W_Armin@gmx.de>
> > > ---
> > > .../admin-guide/kernel-parameters.txt | 3 +++
> > > Documentation/hwmon/dell-smm-hwmon.rst | 21 ++++++++++------
> > > drivers/hwmon/dell-smm-hwmon.c | 25 +++++++++++++------
> > > 3 files changed, 35 insertions(+), 14 deletions(-)
> > >
> > > diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> > > index d68053db21cc..4f1b6c2b7ed1 100644
> > > --- a/Documentation/admin-guide/kernel-parameters.txt
> > > +++ b/Documentation/admin-guide/kernel-parameters.txt
> > > @@ -968,6 +968,9 @@
> > > dell_smm_hwmon.fan_max=
> > > [HW] Maximum configurable fan speed.
> > >
> > > + dell_smm_hwmon.fan_mode_method=
> > > + [HW] Method to use for changing fan mode.
> > > +
> > > dfltcc= [HW,S390]
> > > Format: { on | off | def_only | inf_only | always }
> > > on: s390 zlib hardware support for compression on
> > > diff --git a/Documentation/hwmon/dell-smm-hwmon.rst b/Documentation/hwmon/dell-smm-hwmon.rst
> > > index beec88491171..564d99cda869 100644
> > > --- a/Documentation/hwmon/dell-smm-hwmon.rst
> > > +++ b/Documentation/hwmon/dell-smm-hwmon.rst
> > > @@ -67,13 +67,16 @@ for your hardware. It is possible that codes that work for other
> > > laptops actually work for yours as well, or that you have to discover
> > > new codes.
> > >
> > > -Check the list ``i8k_whitelist_fan_control`` in file
> > > -``drivers/hwmon/dell-smm-hwmon.c`` in the kernel tree: as a first
> > > -attempt you can try to add your machine and use an already-known code
> > > -pair. If, after recompiling the kernel, you see that ``pwm1_enable``
> > > -is present and works (i.e., you can manually control the fan speed),
> > > -then please submit your finding as a kernel patch, so that other users
> > > -can benefit from it. Please see
> > > +As a first step, you can load the module with the module parameter
> > > +``fan_mode_method`` set to 1 to test if your hardware works with
> > > +an already know method for disabling automatic BIOS fan control.
> > > +If ``pwm1_enable`` is now present and works (i.e., you can
> > > +manually control the fan speed), then please submit your finding
> > > +as a kernel patch, so that other users can benefit from it.
> > > +Just add your model to the list ``i8k_whitelist_fan_control`` in
> > > +file ``drivers/hwmon/dell-smm-hwmon.c`` in the kernel tree and use
> > > +the already known code pair.
> > > +Please read
> > > :ref:`Documentation/process/submitting-patches.rst <submittingpatches>`
> > > for information on submitting patches.
> > >
> > > @@ -120,6 +123,10 @@ Module parameters
> > > Maximum configurable fan speed. (default:
> > > autodetect)
> > >
> > > +* fan_mode_method:uint
> > > + Method to use for changing fan mode (default:
> > > + from whitelist)
> > > +
> > > Legacy ``/proc`` interface
> > > --------------------------
> > >
> > > diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c
> > > index 9949eeb79378..1c4cc516c8b2 100644
> > > --- a/drivers/hwmon/dell-smm-hwmon.c
> > > +++ b/drivers/hwmon/dell-smm-hwmon.c
> > > @@ -111,6 +111,10 @@ static uint fan_max;
> > > module_param(fan_max, uint, 0);
> > > MODULE_PARM_DESC(fan_max, "Maximum configurable fan speed (default: autodetect)");
> > >
> > > +static uint fan_mode_method;
> > > +module_param_unsafe(fan_mode_method, uint, 0);
> > > +MODULE_PARM_DESC(fan_mode_method, "Method to use for changing fan mode (default: from whitelist)");
> > No, please really do not introduce another kernel parameter for this
> > driver. There are already many and we do not need to extend this list.
> >
> > > +
> > > struct smm_regs {
> > > unsigned int eax;
> > > unsigned int ebx;
> > > @@ -677,7 +681,7 @@ static umode_t dell_smm_is_visible(const void *drvdata, enum hwmon_sensor_types
> > >
> > > break;
> > > case hwmon_pwm_enable:
> > > - if (data->auto_fan)
> > > + if (data->auto_fan && data->manual_fan)
> > > /*
> > > * There is no command for retrieve the current status
> > > * from BIOS, and userspace/firmware itself can change
> > > @@ -1282,14 +1286,21 @@ static int __init dell_smm_probe(struct platform_device *pdev)
> > > data->i8k_fan_max = fan_max ? : I8K_FAN_HIGH; /* Must not be 0 */
> > > data->i8k_pwm_mult = DIV_ROUND_UP(255, data->i8k_fan_max);
> > >
> > > - fan_control = dmi_first_match(i8k_whitelist_fan_control);
> > > - if (fan_control && fan_control->driver_data) {
> > > - const struct i8k_fan_control_data *control = fan_control->driver_data;
> > > + /* value specified via module param overrides whitelist */
> > > + if (fan_mode_method > 0 && fan_mode_method <= ARRAY_SIZE(i8k_fan_control_data)) {
> > > + data->manual_fan = i8k_fan_control_data[fan_mode_method - 1].manual_fan;
> > > + data->auto_fan = i8k_fan_control_data[fan_mode_method - 1].auto_fan;
> > > + } else {
> > > + fan_control = dmi_first_match(i8k_whitelist_fan_control);
> > > + if (fan_control && fan_control->driver_data) {
> > > + const struct i8k_fan_control_data *control = fan_control->driver_data;
> > >
> > > - data->manual_fan = control->manual_fan;
> > > - data->auto_fan = control->auto_fan;
> > > - dev_info(&pdev->dev, "enabling support for setting automatic/manual fan control\n");
> > > + data->manual_fan = control->manual_fan;
> > > + data->auto_fan = control->auto_fan;
> > > + }
> > > }
> > > + if (data->manual_fan && data->auto_fan)
> > > + dev_info(&pdev->dev, "enabling support for setting automatic/manual fan control\n");
> > >
> > > if (!fan_mult) {
> > > /*
> > > --
> > > 2.30.2
> > >

\
 
 \ /
  Last update: 2022-02-15 20:51    [W:1.273 / U:0.940 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site