lkml.org 
[lkml]   [2022]   [Feb]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 067/116] gpio: sifive: use the correct register to read output values
Date
From: Niklas Cassel <niklas.cassel@wdc.com>

[ Upstream commit cc38ef936840ac29204d806deb4d1836ec509594 ]

Setting the output of a GPIO to 1 using gpiod_set_value(), followed by
reading the same GPIO using gpiod_get_value(), will currently yield an
incorrect result.

This is because the SiFive GPIO device stores the output values in reg_set,
not reg_dat.

Supply the flag BGPIOF_READ_OUTPUT_REG_SET to bgpio_init() so that the
generic driver reads the correct register.

Fixes: 96868dce644d ("gpio/sifive: Add GPIO driver for SiFive SoCs")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[Bartosz: added the Fixes tag]
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/gpio/gpio-sifive.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-sifive.c b/drivers/gpio/gpio-sifive.c
index d5eb9ca119016..4f28fa73450c1 100644
--- a/drivers/gpio/gpio-sifive.c
+++ b/drivers/gpio/gpio-sifive.c
@@ -206,7 +206,7 @@ static int sifive_gpio_probe(struct platform_device *pdev)
NULL,
chip->base + SIFIVE_GPIO_OUTPUT_EN,
chip->base + SIFIVE_GPIO_INPUT_EN,
- 0);
+ BGPIOF_READ_OUTPUT_REG_SET);
if (ret) {
dev_err(dev, "unable to init generic GPIO\n");
return ret;
--
2.34.1


\
 
 \ /
  Last update: 2022-02-14 11:10    [W:0.461 / U:0.984 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site