lkml.org 
[lkml]   [2022]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/4] iio: potentiometer: Alignment to match the open parenthesis
Date
Fix following checkpatch.pl check by removing black space
CHECK: Alignment should match open parenthesis

Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com>
---
drivers/iio/potentiometer/ds1803.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/potentiometer/ds1803.c b/drivers/iio/potentiometer/ds1803.c
index 20b45407eaac..3481dd460525 100644
--- a/drivers/iio/potentiometer/ds1803.c
+++ b/drivers/iio/potentiometer/ds1803.c
@@ -55,8 +55,8 @@ static const struct iio_chan_spec ds1803_channels[] = {
};

static int ds1803_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int *val, int *val2, long mask)
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
{
struct ds1803_data *data = iio_priv(indio_dev);
int pot = chan->channel;
@@ -66,7 +66,7 @@ static int ds1803_read_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_RAW:
ret = i2c_master_recv(data->client, result,
- indio_dev->num_channels);
+ indio_dev->num_channels);
if (ret < 0)
return ret;

@@ -83,8 +83,8 @@ static int ds1803_read_raw(struct iio_dev *indio_dev,
}

static int ds1803_write_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *chan,
- int val, int val2, long mask)
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
{
struct ds1803_data *data = iio_priv(indio_dev);
int pot = chan->channel;
@@ -110,7 +110,7 @@ static const struct iio_info ds1803_info = {
};

static int ds1803_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+ const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
struct ds1803_data *data;
--
2.17.1
\
 
 \ /
  Last update: 2022-02-14 04:37    [W:0.076 / U:26.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site