lkml.org 
[lkml]   [2022]   [Feb]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v3 1/2] dt-binding: mmc: Add mmc yaml file for Sunplus SP7021
Date
Dear Uffe:

> Subject: Re: [PATCH v3 1/2] dt-binding: mmc: Add mmc yaml file for Sunplus
> SP7021
>
> On Thu, 10 Feb 2022 at 09:56, Tony Huang 黃懷厚
> <tony.huang@sunplus.com> wrote:
> >
> > Dear Robh:
> >
> > > Subject: Re: [PATCH v3 1/2] dt-binding: mmc: Add mmc yaml file for
> > > Sunplus
> > > SP7021
> > >
> > > On Wed, Feb 09, 2022 at 06:41:06PM +0800, Tony Huang wrote:
> > > > Add mmc yaml file for Sunplus SP7021
> > > >
> > > > Signed-off-by: Tony Huang <tonyhuang.sunplus@gmail.com>
> > > > ---
> > > > Changes in v3:
> > > > - combine sdcard and eMMC into one driver.
> > > >
> > > > .../devicetree/bindings/mmc/sunplus-mmc.yaml | 76
> > > ++++++++++++++++++++++
> > > > MAINTAINERS | 6 ++
> > > > 2 files changed, 82 insertions(+) create mode 100644
> > > > Documentation/devicetree/bindings/mmc/sunplus-mmc.yaml
> > > >
> > > > diff --git
> > > > a/Documentation/devicetree/bindings/mmc/sunplus-mmc.yaml
> > > > b/Documentation/devicetree/bindings/mmc/sunplus-mmc.yaml
> > > > new file mode 100644
> > > > index 0000000..8f44d13
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/mmc/sunplus-mmc.yaml
> > > > @@ -0,0 +1,76 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) #
> > > > +Copyright
> > > > +(C) Sunplus Ltd. Co. 2021 %YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/mmc/sunplus-mmc.yaml#
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: sunplus MMC controller
> > > > +
> > > > +allOf:
> > > > + - $ref: "mmc-controller.yaml"
> > > > +
> > > > +maintainers:
> > > > + - Tony Huang <tonyhuang.sunplus@gmail.com>
> > > > + - Li-hao Kuo <lhjeff911@gmail.com>
> > > > +
> > > > +properties:
> > > > + compatible:
> > > > + enum:
> > > > + - sunplus,sp7021-emmc
> > > > + - sunplus,sp7021-sdhci
> > >
> > > Why are these still different? Looking at the driver, it seems the
> > > settings are the same for both. And for clock speeds, we have
> > > properties to control them as they can be board specific.
> > >
> >
> > The register base address of emmc and sd card are different.
> > eMMC and sdcard are individual hardware settings
>
> When I looked at the previous version of the driver(s) that was posted, I got the
> impression that you have some registers in the controller that are specific for
> eMMC, SD or SDIO.
>
> So, depending on how the controller is going to be used (for eMMC, SD or SDIO)
> it's needs to be configured differently. Right?
>
> If I got this right, I think you can instead use the existing common DT
> properties, "no-sd", "no-sdio", "no-mmc" to explain how each controller is
> configured.
>

OK, I will use DT> properties, "no-sd", "no-sdio", "no-mmc" to explain how
each controller is configured.
Thanks
\
 
 \ /
  Last update: 2022-02-14 03:02    [W:0.053 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site