lkml.org 
[lkml]   [2022]   [Feb]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: usb: host: Reduce xhci_handshake timeout in xhci_reset
Sorry for the spam. I have added an incorrect email address in my previous
email.

On Fri, Feb 11, 2022 at 12:16:30PM +0530, Pavan Kondeti wrote:
> On Mon, Jun 28, 2021 at 10:49:00AM +0300, Mathias Nyman wrote:
> > On 28.6.2021 9.55, Jung Daehwan wrote:
> > > On Mon, Jun 28, 2021 at 08:53:02AM +0200, Greg Kroah-Hartman wrote:
> > >> On Mon, Jun 28, 2021 at 11:25:48AM +0900, Jung Daehwan wrote:
> > >>> On Tue, Jun 22, 2021 at 09:56:20PM +0200, Greg Kroah-Hartman wrote:
> > >>>> On Tue, Jun 22, 2021 at 08:24:56PM +0900, Daehwan Jung wrote:
> > >>>>> It seems 10 secs timeout is too long in general case. A core would wait for
> > >>>>> 10 secs without doing other task and it can be happended on every device.
> > >>>>
> > >>>> Only if the handshake does not come back sooner, right?
> > >>>
> > >>> Yes, right.
> > >>>
> > >>>> What is causing your device to timeout here?
> > >>>
> > >>> Host Controller doesn't respond handshake. I don't know why and I ask HW team
> > >>> to debug it.
> > >>
> > >> Please work to fix your hardware, that feels like the root of the
> > >> problem here. If you require the timeout for xhci_reset() to happen,
> > >> then how do you know that the hardware really did reset properly in the
> > >> reduced amount of time you just provided?
> > >>
> > >
> > > I continue fixing this issue with hardware engineer, but currently just
> > > host controller can crash whole system and that's why I want to fix it.
> > > How about adding some error logs in this situation for recognizing this issue?
> > > We can add error log in xhci_stop as xhci_reset can returns error like below.
> > >
> > > static void xhci_stop(struct usb_hcd *hcd)
> > > {
> > > u32 temp;
> > > struct xhci_hcd *xhci = hcd_to_xhci(hcd);
> > > + int ret;
> > >
> > > mutex_lock(&xhci->mutex);
> > >
> > > @@ -733,6 +734,9 @@ static void xhci_stop(struct usb_hcd *hcd)
> > > xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
> > > xhci_halt(xhci);
> > > xhci_reset(xhci);
> > > + if (ret)
> > > + xhci_err(xhci, "%s: Error while reset xhci Host controller - ret = %d\n"
> > > + , __func__, ret);
> > > spin_unlock_irq(&xhci->lock);
> > >
> >
> > We can check the xhci_reset() return value here and print a message, makes sense.
> >
> > The original reason for the 10 second timeout was because a host actually took 9 seconds:
> >
> > commit 22ceac191211cf6688b1bf6ecd93c8b6bf80ed9b
> >
> > xhci: Increase reset timeout for Renesas 720201 host.
> >
> > The NEC/Renesas 720201 xHCI host controller does not complete its reset
> > within 250 milliseconds. In fact, it takes about 9 seconds to reset the
> > host controller, and 1 second for the host to be ready for doorbell
> > rings. Extend the reset and CNR polling timeout to 10 seconds each.
> >
> Agreed.
>
> We also run into the similar issue (very very rarely reproduced) on
> our platforms like SM8450. The issue happens when host mode is de-activated
> (type-c cable disconnected). Since xhci_reset() is called with interrupts
> disabled, a timeout of 10 seconds is fatal to the system.
>
> Thanks,
> Pavan

\
 
 \ /
  Last update: 2022-02-11 08:44    [W:0.068 / U:0.484 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site