lkml.org 
[lkml]   [2022]   [Feb]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 10/12] HID: input: remove the need for HID_QUIRK_INVERT
Sorry for the noise. Hit the wrong buttons...

On Wed, Feb 9, 2022 at 9:21 PM Ping Cheng <pinglinux@gmail.com> wrote:
>
> On Thu, Feb 3, 2022 at 6:33 AM Benjamin Tissoires
> <benjamin.tissoires@redhat.com> wrote:
> >
> > HID_QUIRK_INVERT is kind of complex to deal with and was bogus.
> >
> > Furthermore, it didn't make sense to use a global per struct hid_device
> > quirk for something dynamic as the current state.
> >
> > Store the current tool information in the report itself, and re-order
> > the processing of the fields to enforce having all the tablet "state"
> > fields before getting to In Range and other input fields.
> >
> > This way, we now have all the information whether a tool is present
> > or not while processing In Range.
> >
> > This new behavior enforces that only one tool gets forwarded to userspace
> > at the same time, and that if either eraser or invert is set, we enforce
> > BTN_TOOL_RUBBER.
> >
> > Note that the release of the previous tool now happens in its own EV_SYN
> > report so userspace doesn't get confused by having 2 tools.
> >
> > These changes are tested in the following hid-tools regression tests:
> > https://gitlab.freedesktop.org/libevdev/hid-tools/-/merge_requests/127
> >
> > Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
> >
> > ---
> >
> > Changes in v2:
> > - rework the entire tool switching, this makes the processing
> > slightly more complex but is better for existing userspace.
> > ---
> > drivers/hid/hid-input.c | 98 +++++++++++++++++++++++++++++++++++++----
> > include/linux/hid.h | 6 ++-
> > 2 files changed, 95 insertions(+), 9 deletions(-)
> >
> > diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
> > index 61d91117f4ae..9f8853640648 100644
> > --- a/drivers/hid/hid-input.c
> > +++ b/drivers/hid/hid-input.c
> > @@ -63,8 +63,11 @@ static const struct {
> > * This still leaves us 65535 individual priority values.
> > */
> > static const __u32 hidinput_usages_priorities[] = {
> > + HID_DG_ERASER, /* Eraser (eraser touching) must always come before tipswitch */
> > HID_DG_INVERT, /* Invert must always come before In Range */
> > - HID_DG_INRANGE,
> > + HID_DG_TIPSWITCH, /* Is the tip of the tool touching? */
> > + HID_DG_TIPPRESSURE, /* Tip Pressure might emulate tip switch */
> > + HID_DG_INRANGE, /* In Range needs to come after the other tool states */
> > };
> >
> > #define map_abs(c) hid_map_usage(hidinput, usage, &bit, &max, EV_ABS, (c))
> > @@ -1365,9 +1368,38 @@ static void hidinput_handle_scroll(struct hid_usage *usage,
> > input_event(input, EV_REL, usage->code, hi_res);
> > }
> >
> > +static void hid_report_release_tool(struct hid_report *report, struct input_dev *input,
> > + unsigned int tool)
> > +{
> > + /* if the given tool is not currently reported, ignore */
> > + if (!test_bit(tool, input->key))
> > + return;
> > +
> > + /*
> > + * if the given tool was previously set, release it,
> > + * release any TOUCH and send an EV_SYN
> > + */
> > + input_event(input, EV_KEY, BTN_TOUCH, 0);
> > + input_event(input, EV_KEY, tool, 0);

Took a while for me to find the right device and setup the proper
system for the testing. This block missing the serial number:

input_event(input, EV_MSC, MSC_SERIAL, 0);

Without this line, the next tool will not get its serial number.

> > + input_event(input, EV_SYN, SYN_REPORT, 0);
> > +
> > + report->tool = 0;
> > +}
> > +
> > +static void hid_report_set_tool(struct hid_report *report, struct input_dev *input,
> > + unsigned int new_tool)
> > +{
> > + if (report->tool != new_tool)
> > + hid_report_release_tool(report, input, report->tool);
> > +
> > + input_event(input, EV_KEY, new_tool, 1);
> > + report->tool = new_tool;
> > +}
> > +
> > void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct hid_usage *usage, __s32 value)
> > {
> > struct input_dev *input;
> > + struct hid_report *report = field->report;
> > unsigned *quirks = &hid->quirks;
> >
> > if (!usage->type)
> > @@ -1418,25 +1450,75 @@ void hidinput_hid_event(struct hid_device *hid, struct hid_field *field, struct
> > }
> >
> > switch (usage->hid) {
> > + case HID_DG_ERASER:
> > + report->tool_active |= !!value;
> > +
> > + /*
> > + * if eraser is set, we must enforce BTN_TOOL_RUBBER
> > + * to accommodate for devices not following the spec.
> > + */
> > + if (value)
> > + hid_report_set_tool(report, input, BTN_TOOL_RUBBER);
> > + else if (report->tool != BTN_TOOL_RUBBER)
> > + /* value is off, tool is not rubber, ignore */
> > + return;
> > +
> > + /* let hid-input set BTN_TOUCH */
> > + break;
> > +
> > case HID_DG_INVERT:
> > - *quirks = value ? (*quirks | HID_QUIRK_INVERT) : (*quirks & ~HID_QUIRK_INVERT);
> > + report->tool_active |= !!value;
> > +
> > + /*
> > + * If invert is set, we store BTN_TOOL_RUBBER.
> > + */
> > + if (value)
> > + hid_report_set_tool(report, input, BTN_TOOL_RUBBER);
> > + else if (!report->tool_active)
> > + /* tool_active not set means Invert and Eraser are not set */
> > + hid_report_release_tool(report, input, BTN_TOOL_RUBBER);
> > +
> > + /* no further processing */
> > return;
> >
> > case HID_DG_INRANGE:
> > - if (value) {
> > - input_event(input, usage->type, (*quirks & HID_QUIRK_INVERT) ? BTN_TOOL_RUBBER : usage->code, 1);
> > - return;
> > + report->tool_active |= !!value;
> > +
> > + if (report->tool_active) {
> > + /*
> > + * if tool is not set but is marked as active,
> > + * assume ours
> > + */
> > + if (!report->tool)
> > + hid_report_set_tool(report, input, usage->code);
> > + } else {
> > + hid_report_release_tool(report, input, usage->code);
> > }
> > - input_event(input, usage->type, usage->code, 0);
> > - input_event(input, usage->type, BTN_TOOL_RUBBER, 0);
> > +
> > + /* reset tool_active for the next event */
> > + report->tool_active = false;
> > +
> > + /* no further processing */
> > return;
> >
> > + case HID_DG_TIPSWITCH:
> > + report->tool_active |= !!value;
> > +
> > + /* if tool is set to RUBBER we should ignore the current value */
> > + if (report->tool == BTN_TOOL_RUBBER)
> > + return;

This case should return before HID_DG_INVERT is checked since we may
get TIPSWITCH bit before INVERT. In fact, the device that I tested
sends the tipswatch bit before the invert bit. So, I alway get a PEN
in and out before I get ERASER events, when I bring the pen in with
the side-switch/invert bit pressed.

However, we know not all devices support INVERT. We probably have to
keep the invert quirk to decide if BTN_TOOL_PEN should be set here or
wait until HID_DG_INVERT is reached.

If you are interested in the evtest output, please let me know. I'll
share it with you offline so we don't abuse this list...

Cheers,
Ping

> > + break;
> > +
> > case HID_DG_TIPPRESSURE:
> > if (*quirks & HID_QUIRK_NOTOUCH) {
> > int a = field->logical_minimum;
> > int b = field->logical_maximum;
> >
> > - input_event(input, EV_KEY, BTN_TOUCH, value > a + ((b - a) >> 3));
> > + if (value > a + ((b - a) >> 3)) {
> > + input_event(input, EV_KEY, BTN_TOUCH, 1);
> > + report->tool_active = true;
> > + }
> > }
> > break;
> >
> > diff --git a/include/linux/hid.h b/include/linux/hid.h
> > index eaad0655b05c..feb8df61168f 100644
> > --- a/include/linux/hid.h
> > +++ b/include/linux/hid.h
> > @@ -347,7 +347,7 @@ struct hid_item {
> > */
> > #define MAX_USBHID_BOOT_QUIRKS 4
> >
> > -#define HID_QUIRK_INVERT BIT(0)
> > +/* BIT(0) reserved for backward compatibility, was HID_QUIRK_INVERT */
> > #define HID_QUIRK_NOTOUCH BIT(1)
> > #define HID_QUIRK_IGNORE BIT(2)
> > #define HID_QUIRK_NOGET BIT(3)
> > @@ -515,6 +515,10 @@ struct hid_report {
> > unsigned maxfield; /* maximum valid field index */
> > unsigned size; /* size of the report (bits) */
> > struct hid_device *device; /* associated device */
> > +
> > + /* tool related state */
> > + bool tool_active; /* whether the current tool is active */
> > + unsigned int tool; /* BTN_TOOL_* */
> > };
> >
> > #define HID_MAX_IDS 256
> > --
> > 2.33.1
> >

\
 
 \ /
  Last update: 2022-02-10 06:45    [W:0.085 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site