Messages in this thread | | | Date | Tue, 01 Feb 2022 18:01:28 +0100 | From | Michael Walle <> | Subject | Re: [PATCH REBASED 2/2] dt-bindings: nvmem: cells: add MAC address cell |
| |
Am 2022-02-01 16:55, schrieb Rob Herring: > On Wed, Jan 26, 2022 at 08:07:45AM +0100, Rafał Miłecki wrote: >> From: Rafał Miłecki <rafal@milecki.pl> >> >> This adds support for describing details of NVMEM cell containing MAC >> address. Those are often device specific and could be nicely stored in >> DT. >> >> Initial documentation includes support for describing: >> 1. Cell data format (e.g. Broadcom's NVRAM uses ASCII to store MAC) >> 2. Reversed bytes flash (required for i.MX6/i.MX7 OCOTP support) >> 3. Source for multiple addresses (very common in home routers) >> >> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> >> --- >> .../bindings/nvmem/cells/mac-address.yaml | 94 >> +++++++++++++++++++ >> 1 file changed, 94 insertions(+) >> create mode 100644 >> Documentation/devicetree/bindings/nvmem/cells/mac-address.yaml >> >> diff --git >> a/Documentation/devicetree/bindings/nvmem/cells/mac-address.yaml >> b/Documentation/devicetree/bindings/nvmem/cells/mac-address.yaml >> new file mode 100644 >> index 000000000000..f8d19e87cdf0 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/nvmem/cells/mac-address.yaml >> @@ -0,0 +1,94 @@ >> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/nvmem/cells/mac-address.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: NVMEM cell containing a MAC address >> + >> +maintainers: >> + - Rafał Miłecki <rafal@milecki.pl> >> + >> +properties: >> + compatible: >> + const: mac-address >> + >> + format: >> + description: | >> + Some NVMEM cells contain MAC in a non-binary format. >> + >> + ASCII should be specified if MAC is string formatted like: >> + - "01:23:45:67:89:AB" (30 31 3a 32 33 3a 34 35 3a 36 37 3a 38 >> 39 3a 41 42) >> + - "01-23-45-67-89-AB" >> + - "0123456789AB" >> + enum: >> + - ascii >> + >> + reversed-bytes: >> + type: boolean >> + description: | >> + MAC is stored in reversed bytes order. Example: >> + Stored value: AB 89 67 45 23 01 >> + Actual MAC: 01 23 45 67 89 AB >> + >> + base-address: >> + type: boolean >> + description: | >> + Marks NVMEM cell as provider of multiple addresses that are >> relative to >> + the one actually stored physically. Respective addresses can be >> requested >> + by specifying cell index of NVMEM cell. > > While a base address is common, aren't there different ways the base is > modified. > > The problem with these properties is every new variation results in a > new property and the end result is something not well designed. A > unique > compatible string, "#nvmem-cell-cells" and code to interpret the data > is > more flexible.
I actually like having a unique compatible for anything but the basic operations. For example, the sl28 vpd area also has a checksum, which could be handled if there is an own compatible. I don't think this is possible with this proposal. Also there is a version field, what if we change the layout of that thing? Am I supposed to change the device tree? The more I think about Rob's proposal to have a compatible the more I like it.
One of Rafałs concerns are code duplication. I.e. if everything needs its own compatible string, the driver will also have to have all of these. But I'd say, this is a common thing in most drivers.
That being said, I'd really like to have a consens here as this topic is open like forever and I was under the impression that at least we were clear on the device tree side.
-michael
> For something like this to fly, I need some level of confidence this is > enough for everyone for some time (IOW, find all the previous attempts > and get those people's buy-in). You have found at least 3 cases, but I > seem to recall more. > > Rob
| |