lkml.org 
[lkml]   [2022]   [Feb]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v8 00/10] vgaarb: Rework default VGA device selection
From
Hey,
 
Op 31-01-2022 om 23:23 schreef Bjorn Helgaas:
> [+to Maarten, Maxime, Thomas; beginning of thread:
> https://lore.kernel.org/r/20220106000658.243509-1-helgaas@kernel.org]
>
> On Wed, Jan 05, 2022 at 06:06:48PM -0600, Bjorn Helgaas wrote:
>> From: Bjorn Helgaas <bhelgaas@google.com>
>>
>> Current default VGA device selection fails in some cases because part of it
>> is done in the vga_arb_device_init() subsys_initcall, and some arches
>> enumerate PCI devices in pcibios_init(), which runs *after* that.
> Where are we at with this series? Is there anything I can do to move
> it forward?
>
> Bjorn

Hi Bjorn,


I'm afraid that I don't understand the vga arbiter or the vga code well enough to review.

Could you perhaps find someone who could review?

I see Chen wrote some patches and tested, so perhaps they could?

~Maarten

>> For example:
>>
>> - On BMC system, the AST2500 bridge [1a03:1150] does not implement
>> PCI_BRIDGE_CTL_VGA. This is perfectly legal but means the legacy VGA
>> resources won't reach downstream devices unless they're included in the
>> usual bridge windows.
>>
>> - vga_arb_select_default_device() will set a device below such a bridge
>> as the default VGA device as long as it has PCI_COMMAND_IO and
>> PCI_COMMAND_MEMORY enabled.
>>
>> - vga_arbiter_add_pci_device() is called for every VGA device, either at
>> boot-time or at hot-add time, and it will also set the device as the
>> default VGA device, but ONLY if all bridges leading to it implement
>> PCI_BRIDGE_CTL_VGA.
>>
>> - This difference between vga_arb_select_default_device() and
>> vga_arbiter_add_pci_device() means that a device below an AST2500 or
>> similar bridge can only be set as the default if it is enumerated
>> before vga_arb_device_init().
>>
>> - On ACPI-based systems, PCI devices are enumerated by acpi_init(), which
>> runs before vga_arb_device_init().
>>
>> - On non-ACPI systems, like on MIPS system, they are enumerated by
>> pcibios_init(), which typically runs *after* vga_arb_device_init().
>>
>> This series consolidates all the default VGA device selection in
>> vga_arbiter_add_pci_device(), which is always called after enumerating a
>> PCI device.
>>
>> Almost all the work here is Huacai's. I restructured it a little bit and
>> added a few trivial patches on top.
>>
>> I'd like to move vgaarb.c to drivers/pci eventually, but there's another
>> initcall ordering snag that needs to be resolved first, so this leaves
>> it where it is.
>>
>> Bjorn
>>
>> Version history:
>> V0 original implementation as final quirk to set default device.
>> https://lore.kernel.org/r/20210514080025.1828197-6-chenhuacai@loongson.cn
>>
>> V1 rework vgaarb to do all default device selection in
>> vga_arbiter_add_pci_device().
>> https://lore.kernel.org/r/20210705100503.1120643-1-chenhuacai@loongson.cn
>>
>> V2 move arbiter to PCI subsystem, fix nits.
>> https://lore.kernel.org/r/20210722212920.347118-1-helgaas@kernel.org
>>
>> V3 rewrite the commit log of the last patch (which is also summarized
>> by Bjorn).
>> https://lore.kernel.org/r/20210820100832.663931-1-chenhuacai@loongson.cn
>>
>> V4 split the last patch to two steps.
>> https://lore.kernel.org/r/20210827083129.2781420-1-chenhuacai@loongson.cn
>>
>> V5 split Patch-9 again and sort the patches.
>> https://lore.kernel.org/r/20210911093056.1555274-1-chenhuacai@loongson.cn
>>
>> V6 split Patch-5 again and sort the patches again.
>> https://lore.kernel.org/r/20210916082941.3421838-1-chenhuacai@loongson.cn
>>
>> V7 stop moving vgaarb to drivers/pci because of ordering issues with
>> misc_init().
>> https://lore.kernel.org/r/20211015061512.2941859-1-chenhuacai@loongson.cn
>> https://lore.kernel.org/r/CAAhV-H7FhAjM-Ha42Z1dLrE4PvC9frfyeU27KHWcyWKkMftEsA@mail.gmail.com
>>
>>
>> Bjorn Helgaas (8):
>> vgaarb: Factor out vga_select_framebuffer_device()
>> vgaarb: Factor out default VGA device selection
>> vgaarb: Move framebuffer detection to ADD_DEVICE path
>> vgaarb: Move non-legacy VGA detection to ADD_DEVICE path
>> vgaarb: Move disabled VGA device detection to ADD_DEVICE path
>> vgaarb: Remove empty vga_arb_device_card_gone()
>> vgaarb: Use unsigned format string to print lock counts
>> vgaarb: Replace full MIT license text with SPDX identifier
>>
>> Huacai Chen (2):
>> vgaarb: Move vga_arb_integrated_gpu() earlier in file
>> vgaarb: Log bridge control messages when adding devices
>>
>> drivers/gpu/vga/vgaarb.c | 311 +++++++++++++++++++--------------------
>> 1 file changed, 154 insertions(+), 157 deletions(-)
>>
>> --
>> 2.25.1
>>

\
 
 \ /
  Last update: 2022-02-01 16:47    [W:0.128 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site