lkml.org 
[lkml]   [2022]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v11 5/6] dt-bindings: media: wave5: add yaml devicetree bindings
Hello Krzysztof, 

On 07.12.2022 13:31, Krzysztof Kozlowski wrote:
>On 07/12/2022 13:13, Sebastian Fricke wrote:
>> From: Robert Beckett <bob.beckett@collabora.com>
>>
>> Add bindings for the wave5 chips&media codec driver
>>
>> Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
>> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
>> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
>
>What's happening with this patch? Where is the changelog?

The changelog is located in the cover letter.
https://lore.kernel.org/linux-media/20221207121350.66217-1-sebastian.fricke@collabora.com/

>Why it is v11 and first time I see it?

You actually replied to V10:
https://lore.kernel.org/linux-media/20221023085341.s23qinjuw4qls3dn@basti-XPS-13-9310/

>And why it is v11 with basic mistakes and lack of testing?!?
>I would assume that v11 was already seen and tested...

Sorry I don't have a lot of experience with dt-bindings, thank you for
highlighting the issues, I will correct them. And I forgot to build the
documentation during my testing runs.
I took over the patch set from another contributor and as no one
complained about the dt-bindings for the last 10 versions, I concentrated
my energy on other problems.

>
>
>> ---
>> .../devicetree/bindings/cnm,wave5.yml | 72 +++++++++++++++++++
>> 1 file changed, 72 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/cnm,wave5.yml
>
>Wrong directory. It wasn't here at all before, so I am really confused
>how this could happen.

Thanks for the highlight.

I will move it to:
Documentation/devicetree/bindings/media/cnm,wave5.yml

>
>Subject: drop redundant pieces: yaml, devicetree and bindings.

I call it:

dt-bindings: media: chips-media: add wave5 bindings

in V12

Sincerely,
Sebastian Fricke

>
>
>>
>> diff --git a/Documentation/devicetree/bindings/cnm,wave5.yml b/Documentation/devicetree/bindings/cnm,wave5.yml
>> new file mode 100644
>> index 000000000000..01dddebb162e
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/cnm,wave5.yml
>> @@ -0,0 +1,72 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/media/wave5.yaml#
>
>You clearly did not test them before sending.
>
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Chips&Media Wave 5 Series multi-standard codec IP
>> +
>> +maintainers:
>> + - Nas Chung <nas.chung@chipsnmedia.com>
>> + - Robert Beckett <bob.beckett@collabora.com>
>> + - Sebastian Fricke <sebastian.fricke@collabora.com>
>> +
>> +description: |-
>> + The Chips&Media WAVE codec IP is a multi format video encoder/decoder
>> +
>> +properties:
>> + compatible:
>> + anyOf:
>
>Please start from example-schema or other recently approved bindings. No
>anyOf.
>
>> + - items:
>
>No items...
>
>> + - enum:
>> + - cnm,cm511-vpu
>> + - cnm,cm517-vpu
>> + - cnm,cm521-vpu
>> + - cnm,cm521c-vpu
>> + - cnm,cm521c-dual-vpu
>
>What's the difference between this and one above?
>
>> + - cnm,cm521e1-vpu
>> + - cnm,cm537-vpu
>> + reg:
>> + maxItems: 1
>> +
>> + clocks:
>> + minItems: 1
>> + maxItems: 4
>
>This has to be specific.
>
>> +
>> + clock-names:
>> + minItems: 1
>> + maxItems: 4
>
>You need to list the names.
>
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + power-domains:
>> + maxItems: 1
>> +
>> + resets:
>> + maxItems: 1
>> +
>> + sram:
>
>Missing vendor prefix.
>
>> + $ref: /schemas/types.yaml#/definitions/phandle
>> + description: phandle pointing to the SRAM device node
>
>And what is it for? Why do you need SRAM?
>
>> + maxItems: 1
>
>Drop
>
>> +
>> +required:
>> + - compatible
>> + - reg
>> + - interrupts
>> + - clocks
>> + - clock-names
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + vpu: video-codec@12345678 {
>> + compatible = "cnm,cm521-vpu";
>> + reg = <0x12345678 0x1000>;
>> + interrupts = <42>;
>> + clocks = <&clks 42>;
>> + clock-names = "vcodec";
>> + sram = <&sram>;
>> + };
>
>Best regards,
>Krzysztof
>

\
 
 \ /
  Last update: 2022-12-07 16:10    [W:0.070 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site