lkml.org 
[lkml]   [2022]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 2/5] staging: dt-bindings: mfd: adi,max77541.yaml Add MAX77541 bindings
From
On 07/12/2022 10:08, Okan Sahin wrote:
> This patch adds document the bindings for MAX77541 MFD driver. It also

Do not use "This commit/patch".
https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95

> includes MAX77540 driver whose regmap is covered by MAX77541.
>
> Signed-off-by: Okan Sahin <okan.sahin@analog.com>
> ---
> .../devicetree/bindings/mfd/adi,max77541.yaml | 134 ++++++++++++++++++
> MAINTAINERS | 1 +
> 2 files changed, 135 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/adi,max77541.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/adi,max77541.yaml b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml
> new file mode 100644
> index 000000000000..205953e6dd15
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml
> @@ -0,0 +1,134 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/adi,max77541.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: MAX77540/MAX77541 PMIC from ADI.

Drop trailing space.

> +
> +maintainers:
> + - Okan Sahin <okan.sahin@analog.com>
> +
> +description: |
> + MAX77540 is a Power Management IC with 2 buck regulators.
> +
> + MAX77541 is a Power Management IC with 2 buck regulators and 1 ADC.
> +
> +properties:
> + compatible:
> + enum:
> + - adi,max77540
> + - adi,max77541
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + regulators:
> + $ref: /schemas/regulator/adi,max77541.yaml#

I don't think you tested this patch. There is no such file.

> +
> + adc:
> + type: object
> + additionalProperties: false
> + properties:
> + compatible:
> + const: adi,max77541-adc

Why having a child without any resources? It does not look like needed
and instead your parent driver should instantiate the child device.

> + required:
> + -compatible
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> +
> +allOf:
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: adi,max77540
> + then:
> + properties:
> + regulator:
> + properties:
> + compatible:
> + const: adi,max77540-regulator
> + else:
> + properties:
> + regulator:
> + properties:
> + compatible:
> + const: adi,max77541-regulator
> + adc:
> + properties:
> + compatible:
> + const: adi,max77541-adc

The adc part is not needed anyway - duplicating what's in top-level
properties.

> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pmic@69 {
> + compatible = "adi,max77540";
> + reg = <0x69>;
> + interrupt-parent = <&gpio>;
> + interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
> +
> + regulators {
> + buck1 {
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <5200000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + buck2 {
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <5200000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + };
> + };
> + };
> +
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> +
> + i2c {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + pmic@69 {
> + compatible = "adi,max77541";

Keep only one example (more complex one) - they are almost the same.

> + reg = <0x63>;
> + interrupt-parent = <&gpio>;
> + interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
> +
> + regulators {
> + buck1 {
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <5200000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + buck2 {
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <5200000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> + };
> +
> + adc {
> + compatible = "adi,max77541-adc";
> + }
> + };
> + };
> \ No newline at end of file

Error here.

> diff --git a/MAINTAINERS b/MAINTAINERS
> index af94d06bb9f0..22f5a9c490e3 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12501,6 +12501,7 @@ MAXIM MAX77541 PMIC MFD DRIVER
> M: Okan Sahin <okan.sahin@analog.com>
> L: linux-kernel@vger.kernel.org
> S: Maintained
> +F: Documentation/devicetree/bindings/mfd/adi,max77541.yaml
> F: drivers/mfd/max77541.c
> F: include/linux/mfd/max77541.h
>

Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-12-07 11:06    [W:0.120 / U:0.572 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site