lkml.org 
[lkml]   [2022]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V2 2/3] dmaengine: idxd: Prevent use after free on completion memory
Date
On driver unload any pending descriptors are flushed at the
time the interrupt is freed:
idxd_dmaengine_drv_remove() ->
drv_disable_wq() ->
idxd_wq_free_irq() ->
idxd_flush_pending_descs().

If there are any descriptors present that need to be flushed this
flow triggers a "not present" page fault as below:

BUG: unable to handle page fault for address: ff391c97c70c9040
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page

The address that triggers the fault is the address of the
descriptor that was freed moments earlier via:
drv_disable_wq()->idxd_wq_free_resources()

Fix the use after free by freeing the descriptors after any possible
usage. This is done after idxd_wq_reset() to ensure that the memory
remains accessible during possible completion writes by the device.

Fixes: 63c14ae6c161 ("dmaengine: idxd: refactor wq driver enable/disable operations")
Suggested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: stable@vger.kernel.org
---
Changes since V1:
- Add Dave and Fenghua's Reviewed-by tags.
- cc stable team (Fenghua).

drivers/dma/idxd/device.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index fcd03d29a941..b4d7bb923a40 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -1408,11 +1408,11 @@ void drv_disable_wq(struct idxd_wq *wq)
dev_warn(dev, "Clients has claim on wq %d: %d\n",
wq->id, idxd_wq_refcount(wq));

- idxd_wq_free_resources(wq);
idxd_wq_unmap_portal(wq);
idxd_wq_drain(wq);
idxd_wq_free_irq(wq);
idxd_wq_reset(wq);
+ idxd_wq_free_resources(wq);
percpu_ref_exit(&wq->wq_active);
wq->type = IDXD_WQT_NONE;
wq->client_count = 0;
--
2.34.1
\
 
 \ /
  Last update: 2022-12-07 23:53    [W:0.041 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site