lkml.org 
[lkml]   [2022]   [Dec]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RESEND PATCH RFC V4 2/3] PCI: Create device tree node for selected devices
On Mon, Dec 5, 2022 at 6:30 PM Lizhi Hou <lizhi.hou@amd.com> wrote:
>
>
> On 12/1/22 13:12, Rob Herring wrote:
> > On Mon, Nov 21, 2022 at 08:43:03AM -0800, Lizhi Hou wrote:
> >> The PCI endpoint device such as Xilinx Alveo PCI card maps the register
> >> spaces from multiple hardware peripherals to its PCI BAR. Normally,
> >> the PCI core discovers devices and BARs using the PCI enumeration process.
> >> There is no infrastructure to discover the hardware peripherals that are
> >> present in a PCI device, and which can be accessed through the PCI BARs.
> >>
> >> For Alveo PCI card, the card firmware provides a flattened device tree to
> >> describe the hardware peripherals on its BARs. The Alveo card driver can
> >> load this flattened device tree and leverage device tree framework to
> >> generate platform devices for the hardware peripherals eventually.
> >>
> >> Apparently, the device tree framework requires a device tree node for the
> >> PCI device. Thus, it can generate the device tree nodes for hardware
> >> peripherals underneath. Because PCI is self discoverable bus, there might
> >> not be a device tree node created for PCI devices. This patch is to add
> >> support to generate device tree node for PCI devices.
> >>
> >> Added a kernel option. When the option is turned on, the kernel will
> >> generate device tree nodes for PCI bridges unconditionally.
> >>
> >> Initially, the basic properties are added for the dynamically generated
> >> device tree nodes.
> >>
> >> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
> >> Signed-off-by: Sonal Santan <sonal.santan@amd.com>
> >> Signed-off-by: Max Zhen <max.zhen@amd.com>
> >> Reviewed-by: Brian Xu <brian.xu@amd.com>
> >> ---
> >> drivers/pci/Kconfig | 12 ++
> >> drivers/pci/Makefile | 1 +
> >> drivers/pci/bus.c | 2 +
> >> drivers/pci/msi/irqdomain.c | 6 +-
> >> drivers/pci/of.c | 71 ++++++++++
> >> drivers/pci/of_property.c | 256 ++++++++++++++++++++++++++++++++++++
> >> drivers/pci/pci-driver.c | 3 +-
> >> drivers/pci/pci.h | 19 +++
> >> drivers/pci/remove.c | 1 +
> >> 9 files changed, 368 insertions(+), 3 deletions(-)
> >> create mode 100644 drivers/pci/of_property.c
> >>
> >> diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
> >> index 55c028af4bd9..126c31b79718 100644
> >> --- a/drivers/pci/Kconfig
> >> +++ b/drivers/pci/Kconfig
> >> @@ -198,6 +198,18 @@ config PCI_HYPERV
> >> The PCI device frontend driver allows the kernel to import arbitrary
> >> PCI devices from a PCI backend to support PCI driver domains.
> >>
> >> +config PCI_DYNAMIC_OF_NODES
> >> + bool "Device tree node for PCI devices"
> > Create Devicetree nodes for PCI devices
> Sure.
> >
> > But as I've said before, making this a config option doesn't really work
> > except as something to experiment with. Once you add your driver and
> > want to do a 'select PCI_DYNAMIC_OF_NODES', you've affected everyone
> > else.
>
> Do you mean we should remove PCI_DYNAMIC_OF_NODES and make
> creating dynamic tree node default?

No, I'm saying as long as it is a config option, it's not useful for
more than experimentation. A distro kernel has to decide how to set a
config option for *everyone*.

> Based on the previous discussions, the approach I am implementing
> is to create device tree nodes for all PCI bridges and devices defined
> by pci quirks. I believe a PCI endpoint which is not defined by PCI quirks
> should not to be affected because there is no device tree node is created
> for it.
>
> Are you fine with this approach?

How does that work? The quirks run when a device is discovered. At
that time you've already discovered and probed everything upstream of
the device. So the only thing controlling the upstream devices getting
a DT node is the config option, right?

> >> + depends on OF
> >> + select OF_DYNAMIC
> >> + help
> >> + This option enables support for generating device tree nodes for some
> >> + PCI devices. Thus, the driver of this kind can load and overlay
> >> + flattened device tree for its downstream devices.
> >> +
> >> + Once this option is selected, the device tree nodes will be generated
> >> + for all PCI bridges.
> >> +
> >> choice
> >> prompt "PCI Express hierarchy optimization setting"
> >> default PCIE_BUS_DEFAULT
> >> diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
> >> index 2680e4c92f0a..cc8b4e01e29d 100644
> >> --- a/drivers/pci/Makefile
> >> +++ b/drivers/pci/Makefile
> >> @@ -32,6 +32,7 @@ obj-$(CONFIG_PCI_P2PDMA) += p2pdma.o
> >> obj-$(CONFIG_XEN_PCIDEV_FRONTEND) += xen-pcifront.o
> >> obj-$(CONFIG_VGA_ARB) += vgaarb.o
> >> obj-$(CONFIG_PCI_DOE) += doe.o
> >> +obj-$(CONFIG_PCI_DYNAMIC_OF_NODES) += of_property.o
> >>
> >> # Endpoint library must be initialized before its users
> >> obj-$(CONFIG_PCI_ENDPOINT) += endpoint/
> >> diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
> >> index 3cef835b375f..8507cc32b61d 100644
> >> --- a/drivers/pci/bus.c
> >> +++ b/drivers/pci/bus.c
> >> @@ -316,6 +316,8 @@ void pci_bus_add_device(struct pci_dev *dev)
> >> */
> >> pcibios_bus_add_device(dev);
> >> pci_fixup_device(pci_fixup_final, dev);
> >> + if (pci_is_bridge(dev))
> >> + of_pci_make_dev_node(dev);
> >> pci_create_sysfs_dev_files(dev);
> >> pci_proc_attach_device(dev);
> >> pci_bridge_d3_update(dev);
> >> diff --git a/drivers/pci/msi/irqdomain.c b/drivers/pci/msi/irqdomain.c
> >> index e9cf318e6670..eeaf44169bfd 100644
> >> --- a/drivers/pci/msi/irqdomain.c
> >> +++ b/drivers/pci/msi/irqdomain.c
> >> @@ -230,8 +230,10 @@ u32 pci_msi_domain_get_msi_rid(struct irq_domain *domain, struct pci_dev *pdev)
> >> pci_for_each_dma_alias(pdev, get_msi_id_cb, &rid);
> >>
> >> of_node = irq_domain_get_of_node(domain);
> >> - rid = of_node ? of_msi_map_id(&pdev->dev, of_node, rid) :
> >> - iort_msi_map_id(&pdev->dev, rid);
> >> + if (of_node && !of_node_check_flag(of_node, OF_DYNAMIC))
> >> + rid = of_msi_map_id(&pdev->dev, of_node, rid);
> >> + else
> >> + rid = iort_msi_map_id(&pdev->dev, rid);
> > I have no idea if this works. It looks kind of broken already if
> > !of_node calls iort_msi_map_id(). With a DT only system, I would think
> > we'd always call of_msi_map_id(). Have you tested MSIs?
> >
> > With a mixed system, I have no idea what happens. That needs to be
> > understood for MSI, DMA, and interrupts.
>
> Yes, I tested MSI in VM.
>
> # cat
> /sys/devices/platform/3f000000.pcie/pci0000:00/0000:00:02.0/0000:09:00.0/0000:0a:00.0/msi_irqs/29
>
> msi
> # cat /proc/interrupts | grep 29
> 29: 1 0 MSI 5242880 Edge pciehp
>
> The idea is to preserve the current behaviror.
>
> current: PCI device does not have dt node, thus iort_msi_map_id()
> is called.
>
> modified code: PCI device has dt node but with OF_DYNAMIC flag,
> thus iort_msi_map_id() is called.
>
> I was planning to take on of_msi_map_id() for dynamically generated dt node
>
> in future when we see a real use case?
>
> >
> >>
> >> return rid;
> >> }
> >> diff --git a/drivers/pci/of.c b/drivers/pci/of.c
> >> index 196834ed44fe..fb60b04f0b93 100644
> >> --- a/drivers/pci/of.c
> >> +++ b/drivers/pci/of.c
> >> @@ -469,6 +469,8 @@ static int of_irq_parse_pci(const struct pci_dev *pdev, struct of_phandle_args *
> >> } else {
> >> /* We found a P2P bridge, check if it has a node */
> >> ppnode = pci_device_to_OF_node(ppdev);
> >> + if (of_node_check_flag(ppnode, OF_DYNAMIC))
> >> + ppnode = NULL;
> >> }
> >>
> >> /*
> >> @@ -599,6 +601,75 @@ int devm_of_pci_bridge_init(struct device *dev, struct pci_host_bridge *bridge)
> >> return pci_parse_request_of_pci_ranges(dev, bridge);
> >> }
> >>
> >> +#if IS_ENABLED(CONFIG_PCI_DYNAMIC_OF_NODES)
> >> +
> >> +void of_pci_remove_node(struct pci_dev *pdev)
> >> +{
> >> + struct device_node *dt_node;
> > node or np are the typical names.
> Will fix this.
> >
> >> +
> >> + dt_node = pci_device_to_OF_node(pdev);
> >> + if (!dt_node || !of_node_check_flag(dt_node, OF_DYNAMIC))
> >> + return;
> >> + pdev->dev.of_node = NULL;
> >> +
> >> + of_destroy_node(dt_node);
> >> +}
> >> +
> >> +void of_pci_make_dev_node(struct pci_dev *pdev)
> >> +{
> >> + struct device_node *parent, *dt_node = NULL;
> >> + const char *pci_type = "dev";
> >> + struct of_changeset *cset;
> >> + const char *full_name;
> >> + int ret;
> >> +
> >> + /*
> >> + * If there is already a device tree node linked to this device,
> >> + * return immediately.
> >> + */
> >> + if (pci_device_to_OF_node(pdev))
> >> + return;
> >> +
> >> + /* Check if there is device tree node for parent device */
> >> + if (!pdev->bus->self)
> >> + parent = pdev->bus->dev.of_node;
> >> + else
> >> + parent = pdev->bus->self->dev.of_node;
> >> + if (!parent)
> >> + return;
> >> +
> >> + if (pci_is_bridge(pdev))
> >> + pci_type = "pci";
> > What's the node name if not a bridge? I don't see how that would work.
> >
> > It should depend on the device class if it has one.
>
> pci_type is initialized with "dev"
>
> + const char *pci_type = "dev";

I missed that...

> Do you mean I should use class instead of pci_is_bridge()?
>
> if ((pdev->class >> 24) == PCI_BASE_CLASS_BRIDGE)
> pci_type = "pci";

Well, maybe as preparation to support other classes. If you had a UART
for example, the node name is 'serial'. I don't think you need to
worry about those ATM. We may need some way for the name to come from
the driver as not all devices have a class. Yours for example, we'd
want something like 'fpga@...' ideally. Maybe that's fine to leave as
a known issue.

Rob

\
 
 \ /
  Last update: 2022-12-07 23:45    [W:0.050 / U:0.896 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site