lkml.org 
[lkml]   [2022]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 6.0 02/13] ASoC: fsl_micfil: explicitly clear CHnF flags
Date
From: Shengjiu Wang <shengjiu.wang@nxp.com>

[ Upstream commit b776c4a4618ec1b5219d494c423dc142f23c4e8f ]

There may be failure when start 1 channel recording after
8 channels recording. The reason is that the CHnF
flags are not cleared successfully by software reset.

This issue is triggerred by the change of clearing
software reset bit.

CHnF flags are write 1 clear bits. Clear them by force
write.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1651925654-32060-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
sound/soc/fsl/fsl_micfil.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c
index 8aa6871e0d42..4b86ef82fd93 100644
--- a/sound/soc/fsl/fsl_micfil.c
+++ b/sound/soc/fsl/fsl_micfil.c
@@ -205,6 +205,14 @@ static int fsl_micfil_reset(struct device *dev)
if (ret)
return ret;

+ /*
+ * Set SRES should clear CHnF flags, But even add delay here
+ * the CHnF may not be cleared sometimes, so clear CHnF explicitly.
+ */
+ ret = regmap_write_bits(micfil->regmap, REG_MICFIL_STAT, 0xFF, 0xFF);
+ if (ret)
+ return ret;
+
return 0;
}

--
2.35.1
\
 
 \ /
  Last update: 2022-12-06 10:50    [W:0.072 / U:1.400 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site