lkml.org 
[lkml]   [2022]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2] docs: Integrate rustdoc into Rust documentation
From
On 12/4/22 19:06, Akira Yokosawa wrote:

> Hi,
>
> On Thu, 1 Dec 2022 14:48:14 -0600, Carlos Bilbao wrote:
>> Include HTML output generated with rustdoc into the Linux kernel
>> documentation on Rust. Change target `make htmldocs` to combine RST Sphinx
>> and the generation of Rust documentation, when support is available.
>>
>> Signed-off-by: Carlos Bilbao <carlos.bilbao@amd.com>
>> ---
>>
>> Changes since V1:
>> - Work on top of v6.1-rc1.
> Thank you for the rebase.
>
>> - Don't use rustdoc.rst, instead add link to Documentation/rust/index.rst.
>> - In Documentation/Makefile, replace @make rustdoc for $(Q)$(MAKE) rustdoc.
>> - Don't do LLVM=1 for all rustdoc generation within `make htmldocs`.
>> - Add spaces on definition of RUSTDOC_OUTPUT, for consistency.
>>
>> ---
>> Documentation/Makefile | 4 ++++
>> Documentation/rust/index.rst | 3 +++
>> rust/Makefile | 15 +++++++++------
>> 3 files changed, 16 insertions(+), 6 deletions(-)
>>
>> diff --git a/Documentation/Makefile b/Documentation/Makefile
>> index 64d44c1ecad3..f537cf558af6 100644
>> --- a/Documentation/Makefile
>> +++ b/Documentation/Makefile
>> @@ -92,6 +92,10 @@ quiet_cmd_sphinx = SPHINX $@ --> file://$(abspath $(BUILDDIR)/$3/$4)
>> fi
>>
>> htmldocs:
>> +# If Rust support is available, add rustdoc generated contents
>> +ifdef CONFIG_RUST
>> + $(Q)$(MAKE) rustdoc
>> +endif
>> @$(srctree)/scripts/sphinx-pre-install --version-check
>> @+$(foreach var,$(SPHINXDIRS),$(call loop_cmd,sphinx,html,$(var),,$(var)))
> So, this means "make htmldocs" will require kernel .config if CONFIG_RUST=y.
> I'm not sure this new requirement is acceptable for kernel documentation
> testers who just want to build kernel documentation.


This is already kind of the case for Rust-related business.


>
> You are doing three things in this patch.
>
> 1) Change the destination of rustdoc to under Documentation/output/
> 2) Add a cross reference to the generated rustdoc in
> Documentation/rust/index.rst.
> 3) Integrate rustdoc generation into htmldocs.
>
> I'm OK with 1) and 2).
> Can you separate 3) into another patch and respin?


Glad we can agree on 1) and 2). Why moving 3)? This is a small patch with
one overall purpose (Integrate rustdoc into website).


>
> By the way, is rustdoc's requirement of .config only for CONFIG_RUST?
> In other words, are contents of rustdoc affected by other config settings?
>
> If not, I think rustdoc can be generated regardless of config settings as
> far as necessary tools (rustc, bindgen, etc.) are available.


Yes, but someone with the tools may not want to use them. Keep in mind that
generating rustdoc takes a few extra seconds.


>
>>
>> diff --git a/Documentation/rust/index.rst b/Documentation/rust/index.rst
>> index 4ae8c66b94fa..4005326c3ba9 100644
>> --- a/Documentation/rust/index.rst
>> +++ b/Documentation/rust/index.rst
>> @@ -6,6 +6,9 @@ Rust
>> Documentation related to Rust within the kernel. To start using Rust
>> in the kernel, please read the quick-start.rst guide.
>>
>> +If this documentation includes rustdoc-generated HTML, the entry point can
>> +be found `here. <rustdoc/kernel/index.html>`_
> This cross reference will only make sense in htmldocs build.
> Perhaps, you can use the "only::" directive [1] as follows:
>
> .. only:: html


This I can gladly do on a V3. I will wait for an answer on issues above.


>
> If this documentation includes rustdoc-generated HTML, the entry point can
> be found `here. <rustdoc/kernel/index.html>`_
>
> [1]: https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.sphinx-doc.org%2Fen%2Fmaster%2Fusage%2Frestructuredtext%2Fdirectives.html%23directive-only&amp;data=05%7C01%7Ccarlos.bilbao%40amd.com%7C163763a795284a542e4f08dad65cf4c6%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C638057991984040258%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&amp;sdata=DU8nmQp7gCCGNMUR6urtHHCz5nXAtomeV17%2BzB%2F4L38%3D&amp;reserved=0
>
> Thanks, Akira
>
>> +
>> .. toctree::
>> :maxdepth: 1
>>
>> diff --git a/rust/Makefile b/rust/Makefile
>> index 7700d3853404..080c07048065 100644
>> --- a/rust/Makefile
>> +++ b/rust/Makefile
>> @@ -1,5 +1,8 @@
>> # SPDX-License-Identifier: GPL-2.0
>>
>> +# Where to place rustdoc generated documentation
>> +RUSTDOC_OUTPUT = $(objtree)/Documentation/output/rust/rustdoc
>> +
>> always-$(CONFIG_RUST) += target.json
>> no-clean-files += target.json
>>
>> @@ -58,7 +61,7 @@ quiet_cmd_rustdoc = RUSTDOC $(if $(rustdoc_host),H, ) $<
>> OBJTREE=$(abspath $(objtree)) \
>> $(RUSTDOC) $(if $(rustdoc_host),$(rust_common_flags),$(rust_flags)) \
>> $(rustc_target_flags) -L$(objtree)/$(obj) \
>> - --output $(objtree)/$(obj)/doc \
>> + --output $(RUSTDOC_OUTPUT) \
>> --crate-name $(subst rustdoc-,,$@) \
>> @$(objtree)/include/generated/rustc_cfg $<
>>
>> @@ -75,15 +78,15 @@ quiet_cmd_rustdoc = RUSTDOC $(if $(rustdoc_host),H, ) $<
>> # and then retouch the generated files.
>> rustdoc: rustdoc-core rustdoc-macros rustdoc-compiler_builtins \
>> rustdoc-alloc rustdoc-kernel
>> - $(Q)cp $(srctree)/Documentation/images/logo.svg $(objtree)/$(obj)/doc
>> - $(Q)cp $(srctree)/Documentation/images/COPYING-logo $(objtree)/$(obj)/doc
>> - $(Q)find $(objtree)/$(obj)/doc -name '*.html' -type f -print0 | xargs -0 sed -Ei \
>> + $(Q)cp $(srctree)/Documentation/images/logo.svg $(RUSTDOC_OUTPUT)
>> + $(Q)cp $(srctree)/Documentation/images/COPYING-logo $(RUSTDOC_OUTPUT)
>> + $(Q)find $(RUSTDOC_OUTPUT) -name '*.html' -type f -print0 | xargs -0 sed -Ei \
>> -e 's:rust-logo\.svg:logo.svg:g' \
>> -e 's:rust-logo\.png:logo.svg:g' \
>> -e 's:favicon\.svg:logo.svg:g' \
>> -e 's:<link rel="alternate icon" type="image/png" href="[./]*favicon-(16x16|32x32)\.png">::g'
>> $(Q)echo '.logo-container > img { object-fit: contain; }' \
>> - >> $(objtree)/$(obj)/doc/rustdoc.css
>> + >> $(RUSTDOC_OUTPUT)/rustdoc.css
>>
>> rustdoc-macros: private rustdoc_host = yes
>> rustdoc-macros: private rustc_target_flags = --crate-type proc-macro \
>> @@ -141,7 +144,7 @@ quiet_cmd_rustdoc_test = RUSTDOC T $<
>> @$(objtree)/include/generated/rustc_cfg \
>> $(rustc_target_flags) $(rustdoc_test_target_flags) \
>> --sysroot $(objtree)/$(obj)/test/sysroot $(rustdoc_test_quiet) \
>> - -L$(objtree)/$(obj)/test --output $(objtree)/$(obj)/doc \
>> + -L$(objtree)/$(obj)/test --output $(RUSTDOC_OUTPUT) \
>> --crate-name $(subst rusttest-,,$@) $<
>>
>> # We cannot use `-Zpanic-abort-tests` because some tests are dynamic,
>>
>> base-commit: 9abf2313adc1ca1b6180c508c25f22f9395cc780


Thanks,
Carlos

\
 
 \ /
  Last update: 2022-12-05 17:39    [W:1.906 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site