lkml.org 
[lkml]   [2022]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] rcu: Fix kernel stack overflow caused by kprobe on rcu_irq_enter_check_tick()
On Fri, Dec 02, 2022 at 05:54:48PM +0800, Zheng Yejian wrote:
>
>
> On 2022/11/22 03:57, Paul E. McKenney wrote:
> > On Sat, Nov 19, 2022 at 12:00:49PM +0800, Zheng Yejian wrote:
> > > Register kprobe on __rcu_irq_enter_check_tick() can cause kernel stack
> > > overflow [1]. This issue is first found in v5.10 and can be reproduced
> > > by enabling CONFIG_NO_HZ_FULL and doing like:
> > > # cd /sys/kernel/debug/tracing/
> > > # echo 'p:mp1 __rcu_irq_enter_check_tick' >> kprobe_events
> > > # echo 1 > events/kprobes/enable
> > >
> > > So __rcu_irq_enter_check_tick() should not be kprobed, mark it as noinstr.
> >
> > Good catch!
> >
> > I am inclined to queue this, but noticed that one of its callers need
> > it to be noinstr but that the others do not.
> >
> > Need noinstr:
> >
> > o enter_from_kernel_mode() -> __enter_from_kernel_mode() ->
> > rcu_irq_enter_check_tick() -> __rcu_irq_enter_check_tick()
> >
> > Doesn't need noinstr:
> >
> > o ct_nmi_enter() -> rcu_irq_enter_check_tick() ->
> > __rcu_irq_enter_check_tick(), courtesy of the call to
> > instrumentation_begin() in ct_nmi_enter() that precedes the call
> > to rcu_irq_enter_check_tick().
> >
> > o irqentry_enter() -> rcu_irq_enter_check_tick() ->
> > __rcu_irq_enter_check_tick(), courtesy of the call to
> > instrumentation_begin() in irqentry_enter() that precedes the
> > call to rcu_irq_enter_check_tick().
> >
> > Is tagging __rcu_irq_enter_check_tick() with noinstr as
> > proposed in this patch the right thing to do, or should there
> > be calls to instrumentation_begin() and instrumentation_end() in
> > enter_from_kernel_mode()? Or something else entirely?
>
> I have tried the calls to instrumentation_{begin,end}() in
> enter_from_kernel_mode(), see [1]. But this problem can still be
> reproduced, maybe more complete calltrace info [2] is needed for
> analyzing.
>
> Did I add the instrumentation_{begin,end}() in wrong place or is there other
> caller need noinstr?
>
> [1]
> diff --git a/arch/arm64/kernel/entry-common.c
> b/arch/arm64/kernel/entry-common.c
> index 27369fa1c032..deed5a0941d3 100644
> --- a/arch/arm64/kernel/entry-common.c
> +++ b/arch/arm64/kernel/entry-common.c
> @@ -49,7 +49,9 @@ static __always_inline void
> __enter_from_kernel_mode(struct pt_regs *regs)
> }
>
> lockdep_hardirqs_off(CALLER_ADDR0);
> + instrumentation_begin();
> rcu_irq_enter_check_tick();
> + instrumentation_end();
> trace_hardirqs_off_finish();
> }
>
>
> [2]
> [ 48.921197] Call trace:
> [ 48.921241] dump_backtrace+0xf8/0x108
> [ 48.921358] show_stack+0x20/0x48
> [ 48.921418] dump_stack_lvl+0x68/0x84
> [ 48.921477] dump_stack+0x1c/0x38
> [ 48.921530] panic+0x214/0x404
> [ 48.921598] add_taint+0x0/0xf0
> [ 48.921657] panic_bad_stack+0x144/0x160
> [ 48.921715] handle_bad_stack+0x38/0x58
> [ 48.921774] __bad_stack+0x78/0x7c
> [ 48.921825] __rcu_irq_enter_check_tick+0x0/0x1b8
> [ 48.921886] arm64_enter_el1_dbg.isra.0+0x14/0x20
> [ 48.921949] el1_dbg+0x2c/0x90
> [ 48.922001] el1h_64_sync_handler+0xcc/0xe8
> [ 48.922061] el1h_64_sync+0x64/0x68
> [ 48.922112] __rcu_irq_enter_check_tick+0x0/0x1b8
> [...]
> [ 48.938382] __rcu_irq_enter_check_tick+0x0/0x1b8
> [ 48.938441] arm64_enter_el1_dbg.isra.0+0x14/0x20
> [ 48.938500] el1_dbg+0x2c/0x90
> [ 48.938549] el1h_64_sync_handler+0xcc/0xe8
> [ 48.938607] el1h_64_sync+0x64/0x68
> [ 48.938656] __rcu_irq_enter_check_tick+0x0/0x1b8
> [ 48.938715] arm64_enter_el1_dbg.isra.0+0x14/0x20
> [ 48.938778] el1_dbg+0x2c/0x90
> [ 48.938829] el1h_64_sync_handler+0xcc/0xe8
> [ 48.938887] el1h_64_sync+0x64/0x68
> [ 48.938936] __rcu_irq_enter_check_tick+0x0/0x1b8
> [ 48.938995] arm64_enter_el1_dbg.isra.0+0x14/0x20
> [ 48.939054] el1_dbg+0x2c/0x90
> [ 48.939105] el1h_64_sync_handler+0xcc/0xe8
> [ 48.939164] el1h_64_sync+0x64/0x68
> [ 48.939215] __rcu_irq_enter_check_tick+0x0/0x1b8

Well, that looks strange. If that is called under instrumentation_begin()...

+Cc: Peter in case he has an idea.

Thanks.


> [ 48.939274] el1_interrupt+0x28/0x60
> [ 48.939327] el1h_64_irq_handler+0x18/0x28
> [ 48.939385] el1h_64_irq+0x64/0x68
> [ 48.939434] __asan_load8+0x54/0xa8
> [ 48.939500] __ftrace_set_clr_event_nolock+0x6c/0x198
> [ 48.939563] __ftrace_set_clr_event+0x58/0x80
> [ 48.939618] system_enable_write+0x144/0x178
> [ 48.939673] vfs_write+0x174/0x738
> [ 48.939734] ksys_write+0xd0/0x188
> [ 48.939791] __arm64_sys_write+0x4c/0x60
> [ 48.939851] invoke_syscall+0x64/0x180
> [ 48.939921] el0_svc_common.constprop.0+0x84/0x160
> [ 48.939996] do_el0_svc+0x48/0xf8
> [ 48.940062] el0_svc+0x34/0xd0
> [ 48.940114] el0t_64_sync_handler+0xb8/0xc0
> [ 48.940173] el0t_64_sync+0x18c/0x190
> [ 48.940872] SMP: stopping secondary CPUs
> [ 48.942844] Kernel Offset: 0x2d9499c00000 from 0xffff800008000000
> [ 48.942938] PHYS_OFFSET: 0xffffaa9840000000
> [ 48.942999] CPU features: 0x00000,00d00080,0000421b
> [ 48.943387] Memory Limit: none
>
>
> >
> > Thoughts?
>
> Sorry, I have no more idea :-(
>
> >
> > Thanx, Paul
> >
> > > [1]
> > > Insufficient stack space to handle exception!
> > > Insufficient stack space to handle exception!
> > > [...]
> > > Kernel panic - not syncing: kernel stack overflow
> > > CPU: 3 PID: 34 Comm: migration/3 Not tainted
> > > 6.1.0-rc5-00884-g84368d882b96 #2
> > > Hardware name: linux,dummy-virt (DT)
> > > Stopper: multi_cpu_stop+0x0/0x228 <- __stop_cpus.constprop.0+0xa4/0x100
> > > Call trace:
> > > dump_backtrace+0xf8/0x108
> > > show_stack+0x20/0x48
> > > dump_stack_lvl+0x68/0x84
> > > dump_stack+0x1c/0x38
> > > panic+0x214/0x404
> > > add_taint+0x0/0xf0
> > > panic_bad_stack+0x144/0x160
> > > handle_bad_stack+0x38/0x58
> > > __bad_stack+0x78/0x7c
> > > el1h_64_sync_handler+0x4/0xe8
> > > __rcu_irq_enter_check_tick+0x0/0x1b8
> > > arm64_enter_el1_dbg.isra.0+0x14/0x20
> > > el1_dbg+0x2c/0x90
> > > el1h_64_sync_handler+0xcc/0xe8
> > > el1h_64_sync+0x64/0x68
> > > __rcu_irq_enter_check_tick+0x0/0x1b8
> > > arm64_enter_el1_dbg.isra.0+0x14/0x20
> > > el1_dbg+0x2c/0x90
> > > el1h_64_sync_handler+0xcc/0xe8
> > > el1h_64_sync+0x64/0x68
> > > __rcu_irq_enter_check_tick+0x0/0x1b8
> > > arm64_enter_el1_dbg.isra.0+0x14/0x20
> > > el1_dbg+0x2c/0x90
> > > el1h_64_sync_handler+0xcc/0xe8
> > > el1h_64_sync+0x64/0x68
> > > __rcu_irq_enter_check_tick+0x0/0x1b8
> > > arm64_enter_el1_dbg.isra.0+0x14/0x20
> > > el1_dbg+0x2c/0x90
> > > el1h_64_sync_handler+0xcc/0xe8
> > > el1h_64_sync+0x64/0x68
> > > __rcu_irq_enter_check_tick+0x0/0x1b8
> > > arm64_enter_el1_dbg.isra.0+0x14/0x20
> > > el1_dbg+0x2c/0x90
> > > el1h_64_sync_handler+0xcc/0xe8
> > > el1h_64_sync+0x64/0x68
> > > __rcu_irq_enter_check_tick+0x0/0x1b8
> > > [...]
> > >
> > > Cc: stable@vger.kernel.org
> > > Fixes: aaf2bc50df1f ("rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter()")
> > > Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
> > > ---
> > > kernel/rcu/tree.c | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/kernel/rcu/tree.c b/kernel/rcu/tree.c
> > > index 93416afebd59..68230f02cfb7 100644
> > > --- a/kernel/rcu/tree.c
> > > +++ b/kernel/rcu/tree.c
> > > @@ -631,7 +631,7 @@ void rcu_irq_exit_check_preempt(void)
> > > * controlled environments, this function allows RCU to get what it
> > > * needs without creating otherwise useless interruptions.
> > > */
> > > -void __rcu_irq_enter_check_tick(void)
> > > +noinstr void __rcu_irq_enter_check_tick(void)
> > > {
> > > struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
> > > --
> > > 2.25.1
> > >
> --
> Best regards,
> Zheng Yejian

\
 
 \ /
  Last update: 2022-12-05 16:36    [W:0.101 / U:0.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site