Messages in this thread Patch in this message | | | Date | Mon, 5 Dec 2022 15:23:11 +0100 | From | Piergiorgio Beruto <> | Subject | Re: [PATCH v2 net-next 1/4] net/ethtool: add netlink interface for the PLCA RS |
| |
On Mon, Dec 05, 2022 at 11:22:09AM +0100, Oleksij Rempel wrote: > A comment about name mapping to specification, spec version and reason > to take one variants instead of other one will be enough Somewhat similar to > what i did for PoDL. See ETHTOOL_A_PODL_* in > Documentation/networking/ethtool-netlink.rst and include/uapi/linux/ethtool.h > > It will help people who use spec to review or extend this UAPI. What about the following? This is the first time I write the documentation in this format, hence I would appreciate if you could give me some feedback prior to regenerating the patches.
Thanks! Piergiorgio
diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index bede24ef44fd..85a7fd6399cb 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -1687,6 +1687,136 @@ to control PoDL PSE Admin functions. This option is implementing ``IEEE 802.3-2018`` 30.15.1.2.1 acPoDLPSEAdminControl. See ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` for supported values.
+PLCA_GET_CFG +======= + +Gets PLCA RS attributes. + +Request contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_PLCA_HEADER`` nested request header + ===================================== ====== ========================== + +Kernel response contents: + + ====================================== ====== ============================= + ``ETHTOOL_A_PLCA_HEADER`` nested reply header + ``ETHTOOL_A_PLCA_VERSION`` u16 Supported PLCA management + interface standard/version + ``ETHTOOL_A_PLCA_ENABLED`` u8 PLCA Admin State + ``ETHTOOL_A_PLCA_NODE_ID`` u8 PLCA unique local node ID + ``ETHTOOL_A_PLCA_NODE_CNT`` u8 Number of PLCA nodes on the + netkork, including the + coordinator + ``ETHTOOL_A_PLCA_TO_TMR`` u8 Transmit Opportunity Timer + value in bit-times (BT) + ``ETHTOOL_A_PLCA_BURST_CNT`` u8 Number of additional packets + the node is allowed to send + within a single TO + ``ETHTOOL_A_PLCA_BURST_TMR`` u8 Time to wait for the MAC to + transmit a new frame before + terminating the burst + ====================================== ====== ============================= + +When set, the optional ``ETHTOOL_A_PLCA_VERSION`` attribute indicates which +standard and version the PLCA management interface complies to. When not set, +the interface is vendor-specific and (possibly) supplied by the driver. +The OPEN Alliance SIG specifies a standard register map for 10BASE-T1S PHYs +embedding the PLCA Reconcialiation Sublayer. See "10BASE-T1S PLCA Management +Registers" at https://www.opensig.org/about/specifications/. When this standard +is supported, ETHTOOL_A_PLCA_VERSION is reported as 0Axx where 'xx' denotes the +map version (see Table A.1.0 — IDVER bits assignment). + +When set, the optional ``ETHTOOL_A_PLCA_ENABLED`` attribute indicates the +administrative state of the PLCA RS. When not set, the node operates in "plain" +CSMA/CD mode. This option is corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.1 +aPLCAAdminState / 30.16.1.2.1 acPLCAAdminControl. + +When set, the optional ``ETHTOOL_A_PLCA_NODE_ID`` attribute indicates the +configured local node ID of the PHY. This ID determines which transmit +opportunity (TO) is reseverd for the node to transmit into. This option is +corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.4 aPLCALocalNodeID. + +When set, the optional ``ETHTOOL_A_PLCA_NODE_CNT`` attribute indicates the +configured maximum number of PLCA nodes on the mixing-segment. This number +determines the total number of transmit opportunities generated during a +PLCA cycle. This attribute is relevant only for the PLCA coordinator, which is +the node with aPLCALocalNodeID set to 0. Follower nodes ignore this setting. +This option is corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.3 +aPLCANodeCount. + +When set, the optional ``ETHTOOL_A_PLCA_TO_TMR`` attribute indicates the +configured value of the transmit opportunity timer in bit-times. This value +must be set equal across all nodes sharing the medium for PLCA to work +correctly. This option is corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.5 +aPLCATransmitOpportunityTimer. + +When set, the optional ``ETHTOOL_A_PLCA_BURST_CNT`` attribute indicates the +configured number of extra packets that the node is allowed to send during a +single transmit opportunity. By default, this attribute is 0, meaning that +the node can only send a sigle frame per TO. When greater than 0, the PLCA RS +keeps the TO after any transmission, waiting for the MAC to send a new frame +for up to aPLCABurstTimer BTs. This can only happen a number of times per PLCA +cycle up to the value of this parameter. After that, the burst is over and the +normal counting of TOs resumes. This option is corresponding to +``IEEE 802.3cg-2019`` 30.16.1.1.6 aPLCAMaxBurstCount. + +When set, the optional ``ETHTOOL_A_PLCA_BURST_TMR`` attribute indicates how +many bit-times the PLCA RS waits for the MAC to initiate a new transmission +when aPLCAMaxBurstCount is greater than 0. If the MAC fails to send a new +frame within this time, the burst ends and the counting of TOs resumes. +Otherwise, the new frame is sent as part of the current burst. This option +is corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.7 aPLCABurstTimer. + +PLCA_SET_CFG +======= + +Sets PLCA RS parameters. + +Request contents: + + ====================================== ====== ============================= + ``ETHTOOL_A_PLCA_HEADER`` nested request header + ``ETHTOOL_A_PLCA_ENABLED`` u8 PLCA Admin State + ``ETHTOOL_A_PLCA_NODE_ID`` u8 PLCA unique local node ID + ``ETHTOOL_A_PLCA_NODE_CNT`` u8 Number of PLCA nodes on the + netkork, including the + coordinator + ``ETHTOOL_A_PLCA_TO_TMR`` u8 Transmit Opportunity Timer + value in bit-times (BT) + ``ETHTOOL_A_PLCA_BURST_CNT`` u8 Number of additional packets + the node is allowed to send + within a single TO + ``ETHTOOL_A_PLCA_BURST_TMR`` u8 Time to wait for the MAC to + transmit a new frame before + terminating the burst + ====================================== ====== ============================= + +For a description of each attribute, see ``PLCA_GET_CFG``. + +PLCA_GET_STATUS +======= + +Gets PLCA RS status information. + +Request contents: + + ===================================== ====== ========================== + ``ETHTOOL_A_PLCA_HEADER`` nested request header + ===================================== ====== ========================== + +Kernel response contents: + + ====================================== ====== ============================= + ``ETHTOOL_A_PLCA_HEADER`` nested reply header + ``ETHTOOL_A_PLCA_STATUS`` u8 PLCA RS operational status + ====================================== ====== ============================= + +When set, the ``ETHTOOL_A_PLCA_STATUS`` attribute indicates whether the node is +detecting the presence of the BEACON on the network. This flag is +corresponding to ``IEEE 802.3cg-2019`` 30.16.1.1.2 aPLCAStatus. + Request translation ===================
@@ -1788,4 +1918,7 @@ are netlink only. n/a ``ETHTOOL_MSG_PHC_VCLOCKS_GET`` n/a ``ETHTOOL_MSG_MODULE_GET`` n/a ``ETHTOOL_MSG_MODULE_SET`` + n/a ``ETHTOOL_MSG_PLCA_GET_CFG`` + n/a ``ETHTOOL_MSG_PLCA_SET_CFG`` + n/a ``ETHTOOL_MSG_PLCA_GET_STATUS`` =================================== =====================================
| |