lkml.org 
[lkml]   [2022]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] ARM: dts: qcom: apq8084-ifc6540: fix overriding SDHCI
On Sun, 4 Dec 2022 at 10:46, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> While changing node names of APQ8084 SDHCI, the ones in IFC6540 board
> were not updated leading to disabled and misconfigured SDHCI.
>
> Cc: <stable@vger.kernel.org>
> Fixes: 2477d81901a2 ("ARM: dts: qcom: Fix sdhci node names - use 'mmc@'")
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Minor nit below.

> ---
> arch/arm/boot/dts/qcom-apq8084-ifc6540.dts | 20 ++++++++++----------
> arch/arm/boot/dts/qcom-apq8084.dtsi | 4 ++--
> 2 files changed, 12 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
> index 44cd72f1b1be..116e59a3b76d 100644
> --- a/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
> +++ b/arch/arm/boot/dts/qcom-apq8084-ifc6540.dts
> @@ -19,16 +19,16 @@ soc {
> serial@f995e000 {
> status = "okay";
> };
> + };
> +};
>
> - sdhci@f9824900 {
> - bus-width = <8>;
> - non-removable;
> - status = "okay";
> - };
> +&sdhc_1 {
> + bus-width = <8>;
> + non-removable;
> + status = "okay";
> +};
>
> - sdhci@f98a4900 {
> - cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
> - bus-width = <4>;
> - };
> - };
> +&sdhc_2 {
> + cd-gpios = <&tlmm 122 GPIO_ACTIVE_LOW>;
> + bus-width = <4>;

Technically this will still be disabled, as there is no 'status = "okay";' here.

> };
> diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
> index fe30abfff90a..4b0d2b4f4b6a 100644
> --- a/arch/arm/boot/dts/qcom-apq8084.dtsi
> +++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
> @@ -421,7 +421,7 @@ blsp2_uart2: serial@f995e000 {
> status = "disabled";
> };
>
> - mmc@f9824900 {
> + sdhc_1: mmc@f9824900 {
> compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
> reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
> reg-names = "hc", "core";
> @@ -434,7 +434,7 @@ mmc@f9824900 {
> status = "disabled";
> };
>
> - mmc@f98a4900 {
> + sdhc_2: mmc@f98a4900 {
> compatible = "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4";
> reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
> reg-names = "hc", "core";
> --
> 2.34.1
>


--
With best wishes
Dmitry

\
 
 \ /
  Last update: 2022-12-04 12:12    [W:0.054 / U:0.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site