lkml.org 
[lkml]   [2022]   [Dec]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next 2/4] phylib: Add support for 10BASE-T1S link modes and PLCA config
On Sun, Dec 04, 2022 at 07:12:03PM +0100, Andrew Lunn wrote:
> On Sun, Dec 04, 2022 at 03:30:52AM +0100, Piergiorgio Beruto wrote:
> > This patch adds the required connection between netlink ethtool and
> > phylib to resolve PLCA get/set config and get status messages.
> > Additionally, it adds the link modes for the IEEE 802.3cg Clause 147
> > 10BASE-T1S Ethernet PHY.
>
> Please break this patch up.
>
> > const char *phy_speed_to_str(int speed)
> > {
> > - BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 99,
> > + BUILD_BUG_ON_MSG(__ETHTOOL_LINK_MODE_MASK_NBITS != 102,
> > "Enum ethtool_link_mode_bit_indices and phylib are out of sync. "
> > "If a speed or mode has been added please update phy_speed_to_str "
> > "and the PHY settings array.\n");
>
> > --- a/include/uapi/linux/ethtool.h
> > +++ b/include/uapi/linux/ethtool.h
> > @@ -1741,6 +1741,9 @@ enum ethtool_link_mode_bit_indices {
> > ETHTOOL_LINK_MODE_800000baseDR8_2_Full_BIT = 96,
> > ETHTOOL_LINK_MODE_800000baseSR8_Full_BIT = 97,
> > ETHTOOL_LINK_MODE_800000baseVR8_Full_BIT = 98,
> > + ETHTOOL_LINK_MODE_10baseT1S_Full_BIT = 99,
> > + ETHTOOL_LINK_MODE_10baseT1S_Half_BIT = 100,
> > + ETHTOOL_LINK_MODE_10baseT1S_P2MP_Half_BIT = 101,
> >
> > /* must be last entry */
> > __ETHTOOL_LINK_MODE_MASK_NBITS
> > diff --git a/net/ethtool/common.c b/net/ethtool/common.c
> > index 21cfe8557205..c586db0c5e68 100644
> > --- a/net/ethtool/common.c
> > +++ b/net/ethtool/common.c
> > @@ -208,6 +208,9 @@ const char link_mode_names[][ETH_GSTRING_LEN] = {
> > __DEFINE_LINK_MODE_NAME(800000, DR8_2, Full),
> > __DEFINE_LINK_MODE_NAME(800000, SR8, Full),
> > __DEFINE_LINK_MODE_NAME(800000, VR8, Full),
> > + __DEFINE_LINK_MODE_NAME(10, T1S, Full),
> > + __DEFINE_LINK_MODE_NAME(10, T1S, Half),
> > + __DEFINE_LINK_MODE_NAME(10, T1S_P2MP, Half),
> > };
> > static_assert(ARRAY_SIZE(link_mode_names) == __ETHTOOL_LINK_MODE_MASK_NBITS);
> >
> > @@ -366,6 +371,9 @@ const struct link_mode_info link_mode_params[] = {
> > __DEFINE_LINK_MODE_PARAMS(800000, DR8_2, Full),
> > __DEFINE_LINK_MODE_PARAMS(800000, SR8, Full),
> > __DEFINE_LINK_MODE_PARAMS(800000, VR8, Full),
> > + __DEFINE_LINK_MODE_PARAMS(10, T1S, Full),
> > + __DEFINE_LINK_MODE_PARAMS(10, T1S, Half),
> > + __DEFINE_LINK_MODE_PARAMS(10, T1S_P2MP, Half),
> > };
> > static_assert(ARRAY_SIZE(link_mode_params) == __ETHTOOL_LINK_MODE_MASK_NBITS);
>
> This is one logical change, so makes one patch, for example.
>
> You are aiming for lots of simple, easy to review, well described,
> obviously correct patches.
Alright, will do.

Thanks,
Piergiorgio

\
 
 \ /
  Last update: 2022-12-04 21:10    [W:0.067 / U:0.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site