lkml.org 
[lkml]   [2022]   [Dec]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/6] clk: sunxi-ng: Allwinner R528/T113 clock support
Date
R528 and T113 are SoCs based on the same design as D1/D1s, but with ARM
CPUs instead of RISC-V. They use the same CCU implementation, meaning
the CCU has gates/resets for all peripherals present on any SoC in this
family. I verified the CAN bus bits are also present on D1/D1s.

Patches 1-2 clean up the Kconfig in preparation for patch 3, which
allows building the driver. Patches 4-6 add the missing binding header
and driver bits.

Changes in v2:
- Expand commit message
- Move dt-bindings header changes to a separate patch

András Szemző (1):
clk: sunxi-ng: d1: Mark cpux clock as critical

Fabien Poussin (1):
clk: sunxi-ng: d1: Add CAN bus gates and resets

Samuel Holland (4):
clk: sunxi-ng: Remove duplicate ARCH_SUNXI dependencies
clk: sunxi-ng: Move SoC driver conditions to dependencies
clk: sunxi-ng: d1: Allow building for R528/T113
dt-bindings: clock: Add D1 CAN bus gates and resets

drivers/clk/sunxi-ng/Kconfig | 71 ++++++++++++-----------
drivers/clk/sunxi-ng/ccu-sun20i-d1.c | 13 ++++-
drivers/clk/sunxi-ng/ccu-sun20i-d1.h | 2 +-
include/dt-bindings/clock/sun20i-d1-ccu.h | 2 +
include/dt-bindings/reset/sun20i-d1-ccu.h | 2 +
5 files changed, 53 insertions(+), 37 deletions(-)

--
2.37.4

\
 
 \ /
  Last update: 2023-03-26 23:24    [W:0.233 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site