Messages in this thread Patch in this message |  | | From | Samuel Holland <> | Subject | [PATCH v2 2/2] ARM: dts: sun8i: nanopi-duo2: Fix regulator GPIO reference | Date | Sat, 31 Dec 2022 16:58:54 -0600 |
| |
The property named in the schema is 'enable-gpios', not 'enable-gpio'. This makes no difference at runtime, because the regulator is marked as always-on, but it breaks validation.
Fixes: 4701fc6e5dd9 ("ARM: dts: sun8i: add FriendlyARM NanoPi Duo2") Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Samuel Holland <samuel@sholland.org> ---
(no changes since v1)
arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts index 43641cb82398..343b02b97155 100644 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-duo2.dts @@ -57,7 +57,7 @@ reg_vdd_cpux: vdd-cpux-regulator { regulator-ramp-delay = <50>; /* 4ms */ enable-active-high; - enable-gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ + enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ gpios-states = <0x1>; states = <1100000 0>, <1300000 1>; -- 2.37.4
|  |