[lkml]   [2022]   [Dec]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v1 0/5] Unify USB Over Current Settings on Toradex Boards
On Tue, Nov 22, 2022 at 04:54:33PM +0100, Philippe Schenker wrote:
> From: Philippe Schenker <>
> This patchset intends to disable the USB Over Current for Toradex i.MX
> boards using the USB chipidea driver.
> We do this on the Carrier-Board device-trees due to the reason, that if
> a customer of us inheriting the module-level device-tree (named -.dtsi)
> does not inherit settings from us that may be incorrect for his
> use-case.
> Philippe Schenker (5):
> ARM: dts: apalis-imx6: Disable usb over-current
> ARM: dts: colibri-imx6: Disable usb over-current
> ARM: dts: colibri-imx6ull: Disable usb over-current
> ARM: dts: colibri-imx7: Disable usb over-current
> arm64: dts: verdin-imx8mm: Disable usb over-current

Applied all, thanks!

 \ /
  Last update: 2023-03-26 23:24    [W:0.066 / U:0.156 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site