lkml.org 
[lkml]   [2022]   [Dec]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] imx6qdl.dtsi: use MAC-address from nvmem
On Wed, Nov 02, 2022 at 03:27:19PM +0100, Nikolaus Voss wrote:
> IMX6QDL has fuse locations specified for storing the MAC for the
> built-in ethernet (Table 5-8 in Reference Manual).
> Define the fuse location in ocotp and refer to them in fec-ethernet.
>
> If the cells are not flashed, the driver behavior is unchanged, i.e.
> other MAC sources will be probed and a random MAC will be used as a
> last resort.
>
> Signed-off-by: Nikolaus Voss <nikolaus.voss@haag-streit.com>
> ---
> arch/arm/boot/dts/imx6qdl.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
> index 4f7fefc14d0ac..7449d554ef1aa 100644
> --- a/arch/arm/boot/dts/imx6qdl.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl.dtsi
> @@ -1053,6 +1053,8 @@ fec: ethernet@2188000 {
> <&clks IMX6QDL_CLK_ENET_REF>;
> clock-names = "ipg", "ahb", "ptp", "enet_out";
> fsl,stop-mode = <&gpr 0x34 27>;
> + nvmem-cells = <&fec_mac_addr>;
> + nvmem-cell-names = "mac-address";

May I ask where is the support of FEC driver for this?

Shawn

> status = "disabled";
> };
>
> @@ -1186,6 +1188,10 @@ tempmon_calib: calib@38 {
> tempmon_temp_grade: temp-grade@20 {
> reg = <0x20 4>;
> };
> +
> + fec_mac_addr: mac-addr@88 {
> + reg = <0x88 6>;
> + };
> };
>
> tzasc@21d0000 { /* TZASC1 */
> --
> 2.34.1
>

\
 
 \ /
  Last update: 2023-03-26 23:24    [W:0.054 / U:0.368 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site