lkml.org 
[lkml]   [2022]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net] net: phy: Update documentation for get_rate_matching
Date
Now that phylink no longer calls phy_get_rate_matching with
PHY_INTERFACE_MODE_NA, phys no longer need to support it. Remove the
documentation mandating support.

Fixes: 7642cc28fd37 ("net: phylink: fix PHY validation with rate adaption")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
---

include/linux/phy.h | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/include/linux/phy.h b/include/linux/phy.h
index 71eeb4e3b1fd..6378c997ded5 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -826,10 +826,7 @@ struct phy_driver {
* whether to advertise lower-speed modes for that interface. It is
* assumed that if a rate matching mode is supported on an interface,
* then that interface's rate can be adapted to all slower link speeds
- * supported by the phy. If iface is %PHY_INTERFACE_MODE_NA, and the phy
- * supports any kind of rate matching for any interface, then it must
- * return that rate matching mode (preferring %RATE_MATCH_PAUSE to
- * %RATE_MATCH_CRS). If the interface is not supported, this should
+ * supported by the phy. If the interface is not supported, this should
* return %RATE_MATCH_NONE.
*/
int (*get_rate_matching)(struct phy_device *phydev,
--
2.35.1.1320.gc452695387.dirty
\
 
 \ /
  Last update: 2023-03-26 23:23    [W:0.050 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site