lkml.org 
[lkml]   [2022]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2] PCI: Fix up L1SS capability for Intel Apollolake PCIe bridge
On Tue, Dec 20, 2022 at 09:11:31AM +0000, Lee, Ron wrote:
> > On Fri, Dec 16, 2022 at 04:29:39PM +0000, Lee, Ron wrote:
> > > > On Thu, Dec 15, 2022 at 05:13:57PM +0800, Ron Lee wrote:
> > Even if you haven't seen a battery life issue, I suspect you might be
> > able to measure a power consumption difference if you looked for it
> > and likely could see issues with manual ASPM enable/disable using
> > sysfs. That might be a legitimate reason for this quirk, and if
> > it is, we should mention it here.
>
> We can arrange the power measurement, but I doubt this quirk has
> correlation to power consumption. My point is that the ASPM
> behavior is not changed with or without this quirk.

Makes sense.

> ...
> I agree that, I ever try to recover the link by traversing list, but
> it didn't work and the capability list have no method to do reverse
> traversal. One approach may save the whole capability list before
> suspend, and check each capability link then restore the missing one
> after resume. Do you think it's practical ? It is appreciated if
> you could recommend a practical solution for this issue.

The issue being "lspci doesn't show L1SS after suspend/resume"?

Is the point of this basically to fix lspci output after
suspend/resume? Or is there something else this fixes?

It sounds like ASPM and L1SS works correctly after suspend/resume
even without this patch?

Bjorn

\
 
 \ /
  Last update: 2023-03-26 23:23    [W:0.089 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site