lkml.org 
[lkml]   [2022]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 2/2] ARM: dts: n900: use iio driver for accelerometer
Date
The accelerometer in the N900 is supported by the iio-framework since commit
8a7449d68670a8f9 ("iio: accel: add support for LIS302DL variant). This commit
switches to it and updates node properties to match the bindings of the new
compatible.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com>
---
arch/arm/boot/dts/omap3-n900.dts | 52 +++++---------------------------
1 file changed, 8 insertions(+), 44 deletions(-)

diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 20d7a7bb6b04..adee3da93421 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -768,55 +768,19 @@ &i2c3 {
clock-frequency = <400000>;

accelerometer@1d {
- compatible = "st,lis3lv02d";
+ compatible = "st,lis302dl";
reg = <0x1d>;

- Vdd-supply = <&vaux1>;
- Vdd_IO-supply = <&vio>;
+ vdd-supply = <&vaux1>;
+ vddio-supply = <&vio>;

interrupt-parent = <&gpio6>;
- interrupts = <21 20>; /* 181 and 180 */
-
- /* click flags */
- st,click-single-x;
- st,click-single-y;
- st,click-single-z;
-
- /* Limits are 0.5g * value */
- st,click-threshold-x = <8>;
- st,click-threshold-y = <8>;
- st,click-threshold-z = <10>;
-
- /* Click must be longer than time limit */
- st,click-time-limit = <9>;
-
- /* Kind of debounce filter */
- st,click-latency = <50>;
-
- /* Interrupt line 2 for click detection */
- st,irq2-click;
-
- st,wakeup-x-hi;
- st,wakeup-y-hi;
- st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
-
- st,wakeup2-z-hi;
- st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */
-
- st,hipass1-disable;
- st,hipass2-disable;
-
- st,axis-x = <1>; /* LIS3_DEV_X */
- st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
- st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
-
- st,min-limit-x = <(-32)>;
- st,min-limit-y = <3>;
- st,min-limit-z = <3>;
+ interrupts = <21 IRQ_TYPE_EDGE_RISING>,
+ <20 IRQ_TYPE_EDGE_RISING>; /* 181 and 180 */

- st,max-limit-x = <(-3)>;
- st,max-limit-y = <32>;
- st,max-limit-z = <32>;
+ mount-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "1";
};

cam1: camera@3e {
--
2.39.0
\
 
 \ /
  Last update: 2023-03-26 23:23    [W:0.797 / U:0.376 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site