lkml.org 
[lkml]   [2022]   [Dec]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/4] rtw88: Configure the registers from rtw_bf_assoc() outside the RCU lock
Date
USB and (upcoming) SDIO support may sleep in the read/write handlers.
Shrink the RCU critical section so it only cover the call to
ieee80211_find_sta() and finding the ic_vht_cap/vht_cap based on the
found station. This moves the chip's BFEE configuration outside the
rcu_read_lock section and thus prevent "scheduling while atomic" or
"Voluntary context switch within RCU read-side critical section!"
warnings when accessing the registers using an SDIO card (which is
where this issue has been spotted in the real world - but it also
affects USB cards).

Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
---
drivers/net/wireless/realtek/rtw88/bf.c | 13 +++++++------
1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtw88/bf.c b/drivers/net/wireless/realtek/rtw88/bf.c
index 038a30b170ef..c827c4a2814b 100644
--- a/drivers/net/wireless/realtek/rtw88/bf.c
+++ b/drivers/net/wireless/realtek/rtw88/bf.c
@@ -49,19 +49,23 @@ void rtw_bf_assoc(struct rtw_dev *rtwdev, struct ieee80211_vif *vif,

sta = ieee80211_find_sta(vif, bssid);
if (!sta) {
+ rcu_read_unlock();
+
rtw_warn(rtwdev, "failed to find station entry for bss %pM\n",
bssid);
- goto out_unlock;
+ return;
}

ic_vht_cap = &hw->wiphy->bands[NL80211_BAND_5GHZ]->vht_cap;
vht_cap = &sta->deflink.vht_cap;

+ rcu_read_unlock();
+
if ((ic_vht_cap->cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) &&
(vht_cap->cap & IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)) {
if (bfinfo->bfer_mu_cnt >= chip->bfer_mu_max_num) {
rtw_dbg(rtwdev, RTW_DBG_BF, "mu bfer number over limit\n");
- goto out_unlock;
+ return;
}

ether_addr_copy(bfee->mac_addr, bssid);
@@ -75,7 +79,7 @@ void rtw_bf_assoc(struct rtw_dev *rtwdev, struct ieee80211_vif *vif,
(vht_cap->cap & IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)) {
if (bfinfo->bfer_su_cnt >= chip->bfer_su_max_num) {
rtw_dbg(rtwdev, RTW_DBG_BF, "su bfer number over limit\n");
- goto out_unlock;
+ return;
}

sound_dim = vht_cap->cap &
@@ -98,9 +102,6 @@ void rtw_bf_assoc(struct rtw_dev *rtwdev, struct ieee80211_vif *vif,

rtw_chip_config_bfee(rtwdev, rtwvif, bfee, true);
}
-
-out_unlock:
- rcu_read_unlock();
}

void rtw_bf_init_bfer_entry_mu(struct rtw_dev *rtwdev,
--
2.39.0
\
 
 \ /
  Last update: 2023-03-26 23:22    [W:0.166 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site